Question about Boss Rc 50
The rc-50 volumes are high and the loops record fine but when I send them to my computer as a wav file the wav file plays silence
Perhaps your computer's sound card is unable to play back at the bit rate and kHz you are recording at on your (mobile?) recorder. I'm not familiar with the RC-50 but if you are recording at 24 bit for example and your computer's sound card is only able to play back at 16 bit it may not reprosuce any sound. Usually you will get an error saying so. Have you tried different playback software?
Posted on Dec 19, 2017
Hi I just got a RC 50 and I face the same problem but looking the content of the data in the Roland folder (after you connect the USB) , I notice the format of the label of each sound's and I understood the problem.
So , here it is .
Before you connect to USB , you have to choose a patch , let say n.16 OK, now the audio file that you want to import into the data folder must be named in this way "016_1.WAV" ,the 16 refer to the patch number and 1 is the phrase number (if you want to put the audio file into the phrase 1 ,or 2 if 2 ecc.)
now disconnect the USB .At this point you just have to increase or decrease the patch number just one time and go back to 16 (it has to refresh the patch info) and you'll find your audio file ready to use in whatever phrase you put it.
Posted on Jun 15, 2009
SOURCE: Why are my exported wav
Make sure that the file format is the same, first. If so, try converting the format from wav. to a more recent format type, such as mp3, or mp4 if possible. This may help, as the computer may recognize it better depending on the program you are playing them with.
Please let me know if you need further assistance.
Guru, Premium Expert, Phone Support @ Fixya.com
Posted on Jun 19, 2011
Tips for a great answer:
Jan 26, 2016 | Boss Rc 50
May 25, 2015 | Fostex Mr8 Mkii Mxl 990991 Recording...
May 23, 2014 | Music
Apr 14, 2017 | Boss Rc 50
Apr 29, 2011 | Boss Rc 50
in any type of situation when data is being transferred and the
connection is prematurely lost there is data lost and or file
the Boss Rc 50 to your computer and backup its entire contents to
your computer if possible.
perform a Hard Reset: While simultaneously holding down the "PLAY
MODE" and "LOOP SYNC" buttons, turn the power on.
Everything should be restored to factory settings.
your backup was successful, then you can transfer desired files (one
at time) to determine if the are usable. If a file causes errors or
malfunction, then most likely it is corrupt.
Hope this helps
Apr 05, 2011 | Boss Rc 50
Oct 30, 2009 | Boss Rc 50
Oct 05, 2009 | Boss Micro BR Digital Recorder
Sep 06, 2009 | Boss Rc 50
Jan 19, 2009 | Boss Rc 50
Jun 11, 2014 | Boss Rc 50
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: