Magpix B350 Binocular Logo

Related Topics:

Question about Magpix B350 Binocular

Open Question

Driver for W7?? - Magpix B350 Binocular

Posted by Anonymous on

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Is windows 7 compatible with a msi mothetboard n1996 p4m900m2-l

relic P4 pentium 4 mobo, with relic VIA chip set junk .
15 years old today, ..
via says most things work, what MS supports I'd never guess, Id try, it , takes no work at all
w7 installs while you watch games?on TV?
or mow the lawn.

I've got a HP Pavilion DV 9700 with 3GB RAM, it's running Windows 7 professional 32bit. It has a video card Geforce 8600m GS, I downloaded the drivers from the Nvidia web page but the driver doesn't seem...

ITS a NOTBOOK, with fixed GPU. (cant change that)
so what was this PC new. what OS? VISTA
and you put on w7?
if yes, did you look up the rules for w7 on that. first.
that is step one, btw.

i think your OS was changed from VIsta to w7
try the Vista driver below. it might work,.

so why not use the HP drivers,for your PC and leave nvida out.
if the HP drivers fails, due to wrong OS, the ask Nvida for help.
not HP. see? If HP does not support w7 , asking them is fail.

first get right 32bit and 64bit, do that first. then pick W7
then pick GPU driver.
ask HP no matter.
they had Nvida chip or Intel, using the wrong chip driver is FAIL

Sony eye motion not found after W7 upgrade VGN-CR11S

you would need w7 camera driver.Being an older model i doubt you will find them .

Upgraded to windows 7 cant find software for web cam i dont have cd,where can i find this software for advent 6651

W7 comes with thousands of drivers pre-installed. If it is compatable with W7 it will automatically install the required driver. Have you plugged it in and allowed W7 to try to install it for you? There are other solutions also if this doesn't work.

I have epson stylus photo 360,i have just got windows 7 and cannot load printer driver for cd printing.i can`t find the programme for it.

Quite possibly the printer driver software is not compatible with W7. You could have a look on the web on the Epson site under 'Support' and see whethee Epson have a driver for the 360 under W7.

ACER 6920G Crystal Eye Webcam Problem

notebook acer Aspire 6920G <<< real name.! 2009 made, long in tooth that
NO OS told at all, it is a windows 7 only PC, so is it still w7
or did others stuff w10 on it and now fails SURE IT WILL.
and the OS and the driver and PC must match
a 3 way match or it will fail. 6902g + w7 match.
and only from, no place else..
ok? w7 only ok? and only for this PC !
the cam must show up in device manager ! no errors. or it will be dead
and guess what 1 more hint, the cam runs off usb (inside)
so if the USB ports are dead so be the cam for the same reason
wrong drivers. and again only w7 acer driver work from
not told at al what OS came with PC new (it was w7) but ive no idea at all history of any PC, and changes to the OS shows weak support on 2009 PC, sorry that is what i see there,
or try this.
internet connected, w7 running
click on device manager and look for errors
and update all Usb and CAM seen there.
this is the w7 microsoft PnP way, that can work. and is safe
no other ways are safe, ever. (googling will get you infected fast)

I installed windows 7 os and my mother board drivers not support that mother board is asus p5rd1-vm. pentium 4 processor 512 ram

Come back on XP or Vista but XP works better.There is no driver for W7 yet.Motherboards manufacturers will provide drivers for W7 when Microsoft will announce that the system(W7) is ready to be sell....Windows 7 is still beta! If Microsoft still provide "UP DATE" for XP why you want to install other OS?
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Magpix Optics Experts

Brad Brown

Level 3 Expert

19166 Answers


Level 3 Expert

85241 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

57124 Answers

Are you a Magpix Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides