Replacement sealing ring for back to basics slushie maker

clean and tighten blade --if still leaks replace seal or need replacement base if damaged

match it up at any hardware store

Unfortunately Back to Basics has decided to do all of their parts in house, so we can no longer get parts from them. We have none of the Blade Assemblies left in stock, so you will have to contact Back to Basics directly.
Here is a link to replacement parts on their website:
http://westbend.com/support/replacement-parts/smoothie-makers.html You can also call them if you cannot find what you need on their website, their number is 800-688-1989 Back to Basics blender blades Back to Basics small appliances and parts

http://westbend.com/support/replacement-parts/smoothie-makers.html

Check to see if the jar has any cracks or if the blade assembly or collar have any cracks.
Is it possibly leaking from the tap valve?
If the blades or tap lever are cracked I would recommend replacing them, however if the jar is cracked i would just buy a new blender. These are great for smoothies but they are all discontinued and parts wont be available for much longer.

Back to Basics does all of there parts in-house now. You will have to go through them to get the parts. Their number is 800-688-1989 or you can go through their website, www.westbend.com. Go to support, replacement parts and smoothie makers. That will give you a list of all of the items available for your smoothie maker.

Thank you,

Colleen
Customer Service
MendingShed.com
800-339-9297

abtec has Back to Basics appliance parts including parts for Back to Basics coffee ... PARTS AND ACCESSORIES FOR BACK TO BASICS BLENDERS AND SMOOTHIE MAKERS ...
www.abtecparts.com/

Has blade assembly

Is this your product, Back to Basics Smoothie Maker Elite, Part Number: SE2000B

http://www.everythingkitchens.com/back-to-basics-smoothie-SEC-Elite.html


This took awhile to find but you are looking for Gasket/seal U12-72.

It can be ordered here:

http://www.abtecparts.com/Back_to_Basics_blender_gaskets.htm

This site should have what you need ..

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=4287&secid=53&linkon=category&linkid=91

kalexis - there is no such thing as support for the Durabrand TSK-9368AP - Wal-Mart decided that the products were so cheap that people would buy a new one if it broke. What I would do is take your blender into an Ace or True Value Hardware store, and have someone find a generic gasket that will fit your blender.

sheens1953 - the seal/gasket for the Smoothie Maker Elite can be found here:
http://www.focuselectrics.com/finditem.cfm?itemid=4308

-Tha Mp3 Doctor

I just bought a replacement part on ebay. It cost about $11, which included shipping. buy-it-now-store.com