I need a code for nec tv

Just to make a note, the RCA 4k UHD TV models such as RTU-**** are horrible for finding remote codes. These TV's are actually made by Curtis. The manua will give you the remote code.. sort of. So far it seems as though all of them are NEC format with a code of A05F .. along with a full key map.. useless for a universal remote, useful for a Windows ore linux serial based IR transmitter.. and maybe a lead to the 5 digit code. NEC codes did not work, seems to be NEC format, which covers 95% of all remotes, NOT NEC product.

The codes specified for the

NEC TV are

0170 0587 1170 0036

0320 0455 0009 0374

0217 0037 0556 0011
0704 0499 1704 0661
If none of these work, the manual for instructions on code searches can be downloaded at
http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/one_for_all/urc3415-manual.zip&area=other
Please rate this solution. Let me know if you have any other questions or comments. Thanks.

The correct remote code to get your Coby TFTV1525 is 10030. Coby makes tvs for NEC and 10030 is the first code on the NEC list.

Try 184 for the NEC TV.
Please rate this solution. Thanks.

right here are the codes.
1521, 1626, 1690, 1716, 1743, 1750, 1823, 1843, 1005, 1009, 1043, 1114, 1127, 1165, 1170, 1171, 1172, 1217, 1657, 1816

Hope this helps,

Stuart

Setting Up Your NEC TV

1. Turn on your TV.
2. On your Tune In remote, press TV and release.
3. Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
4. Enter the first three-digit TV code for your NEC from the list which follows:
   030, 056, 019
   These codes are listed in order of popularity, and the green light will blink twice if you perform this procedure correctly.
5. Aim Tune In at your TV and press Power. Your TV should turn off. If it does not, repeat steps 2-5, trying each code listed in step 4 until you find the one that operates your TV.

Now Test Your TVWhy test? Many times more than one code appears to work. Testing is desirable to be sure you have the correct code for your TV or the other devices you are setting up.

1. Press the Power key to turn on the TV, then press mute, channel scan ("CH") and volume ("VOL") keys. Tune channels 7 and 11 by entering the number followed by the Enter key.
2. If your TV does not pass the test, return to Step 2 at the top of this page. Enter the next three-digit code and repeat the process.

I had similar problem when setting up the YAMAHA remote control for my NEC LCD TV. At the end I found I did not follow the YAMAHA manual properly. Did you hold down the DTV/CBL button, and AT THE SAME TIME press the AV POWER for 3+ seconds? You should be able to "REMOTE SETUP OK" displayed in the front panel of the YAMAHA AV receiver. Hope this helps. BTW, only the TV POWER, TV MUTE and the numeric buttons work in my case.