Please solve my printer problem error code Unable to Init 50
Hi good day! the printer is error 50 due to a paper or some sensor error.. open the printer, or dismantle, clean the sensor and wash the pump of water and change the waste pad of new absorber. locate the sensor under the pump, clean it of alcohol.
SOURCE: Brother DCP-115C printer unable to init.
Here's what the manual states in the troubleshooting section:
Unable to Change
Unable to Clean
Unable to Init
Unable to Print
Unable to Scan
The machine has a mechanical problem.
-OR-
A foreign obstacle such as a clip or ripped
paper is in the machine.
Open the scanner cover and remove
any foreign obstacles inside the
machine. If the error message
continues, disconnect the machine
from the power source for several
minutes then reconnect it.
Check the Brother website here:
http://welcome.solutions.brother.com/BSC/public/eu/gb/en/faq/faq/000000/000500/000065/faq000565_001.html?reg=eu&c=gb&lang=en&prod=dcp115c_eu_as&Cat=11
989 views
Usually answered in minutes!
×