Question about Uniden TRU8885 Digital Answering Machine

Open Question

Welcome please wait message keep popup on base system, no issues with cordless

Welcome please wait message keep popup on base system, yesterday poweroff for 3hrs that time its gets switched off, then power came that time onwards its showing this message, no issues with cordless

Posted by vamsi on

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: Uniden DCT648-3 "welcome Please Wait"

You need to replace the battery

Posted on Dec 25, 2007


Anonymous

SOURCE: DCT646 flashing Welcome Please Wait...

I replaced with a new battery and mine started to work ok

Posted on Oct 05, 2008

Ad
jonniewalker

Starnley Johnwells

  • 1031 Answers

SOURCE: Base unit displaying E4 after we experienced a power black out

e4 error code that means it ihas defective base unit. it happened due to a spike in the power lines that may cause this error

Posted on Feb 09, 2009

James Ely

  • 199 Answers

SOURCE: Uniden TRU 8885 - "Welcome, Please Wait" message on base

Try leaving the unit unplugged for a few minutes and power it up. There can be power surges during an outage that can damage the chips holding the software that loads.

Posted on Aug 24, 2009

Anonymous

  • 1 Answer

SOURCE: one handset gives the message, blinking, Welcome!

I replaced the battery. It solved the problem.

Posted on Dec 21, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a Cordless Uniden Dect 6.0 and also another one that sitts on a bitter base. My problem is this: the cordless with the smaller base shows the message 'Searching' and wont do anything,...


Welcome to FixYa.

Reset the units/set up by doing the following:
  • Turn OFF all the HANDSETS.
  • Remove the batteries of the HANDSETS.
  • Unplug the power source of the BASE.
  • Unplug the phone line of the BASE.
  • Let it stay that way for 30 mins.
  • Insert the battery again of the HANDSETS, make sure it is charged properly.
  • Plug back the power source of the BASE.
  • Plug back the phone line to the BASE.
  • Register any handset that is unregistered (refer to manual).


Keep me posted.

Jas247

Sep 11, 2011 | Uniden D1680 Cordless Phone

1 Answer

I bought a cordless uniden phone DCX 640 on craigslist. it came with an extra handset. My problem is that there is no owner's manual so I don't know how to use the many buttons on the phone base. ...


Your phone's owner manual can be downloaded from this location.
Hope you are able to sort your problems out soon.
Anyway, please, let me know if I can help you out any further.
Regards, Carlos

Jun 20, 2011 | Uniden Cordless Phone exai398i

1 Answer

Satelite phone ..light keeps blinking


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

May 10, 2010 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

One handset gives the message, blinking, Welcome!


I replaced the battery. It solved the problem.

Dec 20, 2009 | Uniden DCT646-3 Cordless Phone

2 Answers

Phone says ''Welcome ... please wait'' when you try to use it


Hi,

I tried to copy and paste the solution for this issue, but Fixya only allows so many charecters and I guess the answer is too long.
Go to http://www.uniden.com/index/manuals_results.cfm?cat=1

and select the owner's manual for your model phone. Follow the procedures for deregistering the handsets and then resetting the base. then re-register the handsets and you should be good to go. It is all pretty easy, just a little to wordy for this forum I guess.

Apr 04, 2009 | Uniden Cordless Phone

2 Answers

Uniden DSS7855+1, flashing ''welcome! please wait...'', wont work


This is not a direct solution to your problem, but a workaround for a similar situation. I have two headsets and two charging stations. One of the headsets was stuck with the message ''Welcome! please wait''. When I put the phone on the charging station it usually sits on nothing would happen, but when I put it on the other station the phone came back to life. The non-working charging station will still charge the phone so it is worth keeping.

Mar 04, 2009 | Uniden Lands Phones

1 Answer

DCT646 flashing Welcome Please Wait...


I replaced with a new battery and mine started to work ok

Jul 23, 2008 | Uniden DCT646-2 Cordless Phone

1 Answer

Uniden cordless phone - model DSS7855


Press and hold "end" and "#" for more than 5 seconds this will de-register your handset without the base unit.
[email protected]
see for more info. http://www.uniden.com.au/RESOURCES_MAIN/pdfs/ELITE8805_OM.pdf

Jan 21, 2008 | Uniden Cordless phone EXS9950

Not finding what you are looking for?
Uniden TRU8885 Digital Answering Machine Logo

Related Topics:

63 views

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8092 Answers

Cindy Wells

Level 3 Expert

6255 Answers

Bruce Robin

Level 2 Expert

300 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...