Washing machine my washing machine model is 1W711E what does it means?

Full 'make model (what it is)' in all questions please.
Question moved from Cell Phones category

I have never come across a '44ed' error code, but it may be dependent on the make and/or model.

https://www.google.com/search?q=44ed+message+mean+on+my+washing+machine

..

Depends on model #

it means something is wrong or it cannot perform an action your tyrna get it to do,,, but you shud be able to find the same model or new model here>>>discountbargainprices.com

Dont know what machine you have there are different meanings related to different makes and models, check out the link for a few of them

http://www.selfix-uk.co.uk/search-keyword.php

Troubleshooting the "E3" error code in Maytag MAH6700 ...

fixitnow.com/.../troubleshooting-the-e3-error-code-in-maytag-mah6700-...

Feb 20, 2011 - These codes in your (made-by-Samsung) Maytag washer might pop up during the ... In fact, the E3 error code means that the Machine Control wants to make the motor spin but won't do it because it's getting a weird reading from the tachometer.... MAH6700 and MAH8700 models (they use the same motor).

I have a samsung frontload washing machine. A code E3 is ...

www.shopyourway.com > Denise LaGrasse > Questions

Mar 15, 2014 - My samsung front loader is not working. do not no what E3 means. ...code F26 mean on a Kenmore Elite model 110.4708 washing machine?

How To Fix 3E Error Code On A Samsung Washing Machine

www.appliancerepairlesson.com/.../how-to-fix-3e-error-code-on-a-samsu...

May 15, 2015 - Samsung uses the 3E error code to indicate a drive motor tach fault. ...If you're handy, you can fix your Samsung front load washing machine error code ....My samsung frontload washer shows e3 and the drum does not turn ...

go google and type in --fault codes for whirlpool washing machine model ghw 150p if one is available there will be a pdf version that you can down load
or go google and type in --workshop manual for whirlpool washing machine model ghw 150p
or you can make a call to an authorized service agent and ask what the codes mean

Fault code 130 means the RPS (rotor position sensor) is not sending correct signals to the control board. The RPS is a small electronic device mounted on top of the motor copper stator. Either the wiring plug attached to the RPS has corroded the contacts or the RPS needs replacing. You will have to lie the machine down on front face to access the motor. Unscrew the centre bolt and remove the outer rotor bowl, then loosen the 4 hex. head bolts holding the stator about half way. Pull stator down so you can remove the wiring plug from RPS. Check for corrosion. If no corrosion then remove & replace the RPS.

Why my hitachi washing machine show fd in the screen

Hi.

It depends on the model. On Whirlpool built machines F01 is EEPROM error, pump drive error, or main relays error.

With Hotpoint F01 means defective triac or defective motor.

make sure the tap is not broken off ,if the tap is good that means you switch is bad, replace it. hope this information could help you.