Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Washing machine won't drain

Our machine will fill up, and run for a short period of time, but then it will stop in mid cycle.   The agitator seems to be stuck - I can't move it by hand.   I can restart the cycle by pulling out the knob and pushing it back in, but it will run for a few minutes and then stop again.  I have drained it by lowering the hose to floor level and letting the water run out.

Posted by katielogan on

  • Anonymous Nov 10, 2007

    My washer won't drain. I have to take the hose and bring it down to floor level and drain it in a bucket

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

It sounds like you may have some bad contacts in the timer or you may have a bad lid switch which will not allow it to go into a spin during the rinse cycles or the final spin.

Posted on Oct 30, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Doesn't work. Why does it stop mid-cycle?


washing machine stopped mid cycle, won't drain : DIY - Reddit

https://www.reddit.com/.../washing_machine_stopped_mid_cycle_...

RedditSep 3, 2014 - helpwashing machine stopped mid cycle, won't drain (self.DIY). submitted 1 ... I get home. Any ideas on how I can just drain the water out of it?

Troubleshoot - washer stops mid cycle, won't drain or spin ...

? 1:58
https://www.youtube.com/watch?v=6Gc0ZgLD6a4
Jun 20, 2012 - Uploaded by searspartsdirect
Troubleshoot - washer stops mid cycle, won't drain or spin .... I agree, this was not helpful, and did not address the no spin issue. like thanks. ... how to fix a Kenmore / whirlpool washing machine that wont drain agitate or spin ...

Washing machine stops mid cycle - White Goods Help

www.whitegoodshelp.co.uk > ... > DIY Washing Machine Repair Help
Sep 9, 2013 - Possible causes when washing machine stops mid cycle by a ... If thewashing machine can't drain the water out then it will stick on the rinses, ...

Why does my washer stop half way through cycle - Ken



Dec 18, 2015 | Washing Machines

2 Answers

My washing machine stopped working in mid-cycle. No agitation is going on and I could not drain it but putting to spin.


Make sure the washer fills with cold water from the beginning of the cycle because most washers have a cold only rinse cycle and if your cold water valve is bad then the machine will stop mid cycle because it cannot fill the washer for the rinse cycle. Secondly, it helps to know which washer you have so please enter more info next time you ask a question. Good luck.

Jun 28, 2015 | Whirlpool Washing Machines

1 Answer

KenmorenLaunry center not draining or advancing cycles


Hi David if the timer is not cycling the tub will not drain ,the washer will not complete cycles, second check the lock switch on the door. this can stop the timer and the tub from draining. when not cycling the timer is at fault , this could be two problems, 1st when everything stops check the door safety switch , 2nd listen for the timer, if it stops running. good luck ,geodaws

Dec 09, 2013 | Kenmore Washing Machines

1 Answer

Maytag heavy duty super capacity washer - stopped mid cycle. Won't drain water. Won't agitate. Water fill function works. Any ideas what to check? Do you know where the fuse is located?


It is a computer problem. My daughters machine did the same thing and the company came out and replaced the computer board and it fixed the problem.

Jul 16, 2011 | Maytag Washing Machines

1 Answer

Kenmore Heavy Duty Series 70 washing machine gets stuck in cycle.


Either your timing motor has broken or the gears that it drives are stripped. The timing motor is easy to replace but if the gears are stripped you will need a whole new dial assembly.

May 09, 2017 | Kenmore Washing Machines

1 Answer

Washing machine fills, but will not agitate, drain or spin


Coupling broken which joins the motor to the gear box. Look and see or listen if the motor is running then if nothing else is working coupling is broke, easy to replace.

Dec 05, 2009 | Whirlpool LSR5132PQ Top Load Washer

1 Answer

Stops in the middle of wash cycle


Hi!

If the cycle doesn't advance, it's probably the timer or a cold-water supply problem:
It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.
It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

May 29, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washing machine begins the wash cycle going immediately to the agitate cycle, without filling up with water first.


water will not stop running into drum unless shut off at faucet does not happen all the time and wife can't find her rubber boots

Apr 26, 2009 | Washing Machines

2 Answers

Machine fills and agitates, but won't drain


Please empty your machine and run the machine empty. If the washer goes through the whole cycle without any clothes. Please let me know

Jan 19, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Whirlpool AWO3761 stuck mid-cycle


The cycle doesn't advanceWhen the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

  • Jul 06, 2008 | Whirlpool AWM6100 Front Load Washer

    Not finding what you are looking for?
    Kenmore 24032\24036 Top Load Washer Logo

    Related Topics:

    163 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Washing Machines Experts

    Harvey Mahal

    Level 2 Expert

    39 Answers

    Kristen Denison
    Kristen Denison

    Level 1 Expert

    13 Answers

    Will Mishler
    Will Mishler

    Level 2 Expert

    307 Answers

    Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...