Need schematic for GE 7-4620 D

Below is a wiring schematic for a different GE Dryer ... but it does have gray and red wires that might help you. I am surprised that wiring colors are not on your schematic. Somewhere within the dryer housing there is taped the technician troubleshooting packet which usually has the wiring diagram with wire colors. On some dryers the packet is not accessible by just taking off the lower front panel ... but the top lid needs to pried up and it can be by where the main circuit board is located.

Service manual in the link

https://www.google.com/search?q=wiring+schematic+for+GE+DPSR610EG7WT

..

Hi,

if you want to connect a wire to a circuit board, you'd need to use a soldering iron to attach the wire to the board. Please research using that soldering iron online before proceeding.

Thank you.

Contact GE directly to request a wiring diagram (not a schematic) for model JT950S0y1ss.

If you are able to get a schematic you will know what is what.
Attached site often has schematics of various appliances - check them out Search Over 2 1 Million Appliance Parts

http://fixitnow.com/wp/2010/09/13/ge-dryer-ds4500eb1ww-schematic/

theres a schematic in each appliance. look there, & if your not sure get a service tech so you dont do more damage

Either heater or Board is most likely bad. You can remove heater and test it with ohm meter for continuity

The new units have all of your schematics, capacitor and a higher price for a reason. With GE I avoid used parts because there is so much electronics you don't want to fry. The wire harness leads match the old and there should not be an extra wire, were would it go if there is not a receptacle for it?
I looked up your unit and the motor replacement is WH20X10009 for the model you quoted. As of now GE is has updated this to model wh20x10006 for around 263 dollars.

You can download GE owner's manuals and installation instructions here.

We're happy to help you and we'd appreciate your thoughtful rating of our answer.