Question about Freezers

1 Answer

Samsung fridge freezer fault code d5 displayed on door panel of model no. RL26DCSW1/XEU

Electricity was off for four hours. When power was turned back on fault code d5 was showing on the door panel and the appliance was not working.

Posted by gary taylor on

Ad

1 Answer

pete Hemi

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Contributor
  • 23 Answers

RESET UNIT BY UNPLUG THEN PROBLEM PERSIST CALL APRO

Posted on May 03, 2014

Ad

3 Related Answers

Bob B

  • 272 Answers

SOURCE: freezer door left open

Your fridge should be fine, if you have surges that frequently getting a whole house surge protection package would make alot of sense. Surges are especially damaging to electronic circuits found in TV's computers, cell phones, answering machines aell frankly in just about everything. Well worth the charge.

Posted on May 22, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: aeg fault codes

aeg santo fridge/ freezer

The fridge part of my appliance is not getting cold please help

Posted on Aug 05, 2009

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: my bosch fridge freezer's alarm light has started

Hi,

As the weather is getting warmer for many people their freezer2_bing.gif and/or refrigerator do not work right because of a dirty condenser coil...

Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...

http://www.fixya.com/support/r4024657-refrigerator_condenser_coil_cleaning


http://www.fixya.com/support/r4588788-refrigerator_or_freezer_not_cooling_or

http://www.fixya.com/support/r3885294-refrigerator_troubleshooting

http://www.fixya.com/support/r4023749-refrigerator_compressor_start_capacitor

heatman101

Posted on May 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the blue snow flake mean on the display


If the power /freezer is set the blue snow flake remains lit.
How do use the digital control panel on my Samsung fridge freezer

to turn off for normal operation and power save push and hold power/freezer button for 3 seconds.

Dec 23, 2015 | Samsung RF217ACPN - 20 cu. ft. French Door...

1 Answer

Our fridge compressor won't run after a power outage, can it be reset?


compressors use a small start / run capacitor to start the compressor
modern fridges do not like spikes from power outages and many power boards and electronic components fail because of this and I am inclined top use a surge protector before the fridge cord plug
I went google and typed in --fault code 88-88 for samsung fridge model rf26aewp and the first site up is error codes /messages/ blinking
the site is support-us.samsung>popup>iframe
there is a detailed answer there with a list of fault codes as well and what they indicate
there are other sites that also refer to the fault that you have

Dec 15, 2015 | Samsung RF267AEWP - 26 cu. ft. French Door...

1 Answer

Samsung rf217acpn/xaa fridge not staying cold and ice build up.


Be sure the drain is clear these are well known for drain blockage. the area behind the shelves is where you would find the evaporator and drain hole.

"Always disconnect power before trying to repair any appliance."

Jul 11, 2017 | Samsung 19.7 Cu. Ft. French Door...

1 Answer

RF267aewp french door refrigerator is acting crazy. Sometimes compressor fan runs, sometimes it doesn't same with freezer fans. Front control panel will not respond so I cannot get into diagno


Had same problem on my fridge a long time ago. Here is what was wrong on mine. Debris had clogged up around the fan blades to the point where the very small motor that runs the fan was not powerful enough to make the fan turn. When this happens the compressor has to work harder and harder until it finally shut down on safety cutout. I had to open the back of the fridge and clean up the fan blades, [ took the opportunity to put a small amount of oil on the fan shaft too, my Norge fridge is now over 50 years old.]

Nov 05, 2014 | Samsung RF267AEWP - 26 cu. ft. French Door...

1 Answer

After a power outage my Samsung SRS580DHLS is displaying and flashing SE? What does this code mean and how do I fix it? Rirht now the control panel only displays SE and does not respond to any presses


Your control board is reacting to a surge in power. Unplug the unit for 5 minutes then replug and follow normal starting procedures. If that does not work think about buying a new unit.

Oct 11, 2014 | Engel Freezer 22 Qt. Fridge/Freezer

1 Answer

How do you get compressor running after power outage?


Hello AnnArborMom, thank you for your inquiry!

I would recommend you adjusting the temperature to a lower setting to see if that would start your compressor to cool. If that is not successful I would contact a professional to come and properly diagnose your appliance. It could be that the power outage shorted the main control board or relay. I hope this is helpful. -Matt

Sep 07, 2014 | Frigidaire FGHF2366PF Gallery 22.6 Cu. Ft....

1 Answer

Hotpoint FZ175G red warning light comes on freezer still freezing after reset light comes on again after a couple of hours


Red light on for High Freezer Temperature Warning
or freezer not cooling, but fridge is and a lot of noise from compressor.
Also, fridge drain hole blocked, water in bottom of fridge.


This is a common fault in Hotpoint Fridge Freezers and can also happen if the door has been left open or has been a power cut.

1. Turn off fridge freezer, or at least turn down the freezer temp to minimum, though not ideal.
2. Open freezer door and remove all drawers.
3. Remove the back panel on the inside of the freezer. This is held in place with 4 screws, which might be 6mm hex head or star allen head. Pull the panel out.
4. Behind where the panel was, there is a cooling element for cooling, pipes, and below this a temperature sensor. If the fridge freezer is not switched off, then fold together a few layers of tinfoil and wrap around the sensor.
5. Use a hairdryer to slowly melt the ice. Melt it around areas where it appears to be hanging on, such as the corners of the cooling element or bolts, as well as any thin sections below the main block of ice around the cooling element, which will be supporting the main block. Use a plastic ice scraper to remove ice but not near pipes or sensor.
Warning: Be careful using electrics around water & melting ice & drips.
6. Below the cooling element, there is a drip channel & drain hole. If this hole is full of ice, pour a small amound of warm water down, leave for 10 seconds and pour a bit more until clear.
In the fridge, clear the drain hole in the same way.
Warning: Do not pour a lot of water down, as this water drains onto a tray above the hot compressor at the rear of the fridge freezer to be evaporated by the heat of the compressor and the tray will only hold a small amount.
7. When all ice is removed, dry all moisture. Put the shelves back. Close door. Turn on fridge freezer. Turn up the freezer temperature to your normal setting. Turn on fast freeze if available. After 1 hour, check with a thermometer. It should be cold enough after 1 or 2 hours.

Sep 17, 2013 | Freezers

1 Answer

Fridgidaire freezer warming up


Red light on for High Freezer Temperature Warning
or freezer not cooling, but fridge is and a lot of noise from compressor.
Also, fridge drain hole blocked, water in bottom of fridge.


This is a common fault in Hotpoint Fridge Freezers and can also happen if the door has been left open or has been a power cut.

1. Turn off fridge freezer, or at least turn down the freezer temp to minimum, though not ideal.
2. Open freezer door and remove all drawers.
3. Remove the back panel on the inside of the freezer. This is held in place with 4 screws, which might be 6mm hex head or star allen head. Pull the panel out.
4. Behind where the panel was, there is a cooling element for cooling, pipes, and below this a temperature sensor. If the fridge freezer is not switched off, then fold together a few layers of tinfoil and wrap around the sensor.
5. Use a hairdryer to slowly melt the ice. Melt it around areas where it appears to be hanging on, such as the corners of the cooling element or bolts, as well as any thin sections below the main block of ice around the cooling element, which will be supporting the main block. Use a plastic ice scraper to remove ice but not near pipes or sensor.
Warning: Be careful using electrics around water & melting ice & drips.
6. Below the cooling element, there is a drip channel & drain hole. If this hole is full of ice, pour a small amound of warm water down, leave for 10 seconds and pour a bit more until clear.
In the fridge, clear the drain hole in the same way.
Warning: Do not pour a lot of water down, as this water drains onto a tray above the hot compressor at the rear of the fridge freezer to be evaporated by the heat of the compressor and the tray will only hold a small amount.
7. When all ice is removed, dry all moisture. Put the shelves back. Close door. Turn on fridge freezer. Turn up the freezer temperature to your normal setting. Turn on fast freeze if available. After 1 hour, check with a thermometer. It should be cold enough after 1 or 2 hours.

Sep 09, 2013 | Freezers

1 Answer

Have american style fridge freezer, model S25B RSB31. Seems to be tripping the electricity supply. When power restored, find that the freezer has two bars where you would see -18c. After putting in and...


Your defrost heat element is shorting, resetting will make it work till defrost cycle kicks in and HEY PRESTO""shorts again...very common fault and bugs the hell out of all of us, check it and I am pretty sure that is the fault. Or you are getting water or condensation in the control panel but very rare.

Regards and hope that sorts the issue...Please dont forget to Vote, I do this for free, Russ

Mar 28, 2011 | Whirlpool Freezers

Not finding what you are looking for?
Freezers Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Freezers Experts

Dennis Boxerman

Level 3 Expert

1300 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...