Question about Mitsubishi MSH09TW Air Conditioner

Open Question

What problems blinking timer - Mitsubishi MSH09TW Air Conditioner

Posted by noe eulalio on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wall timer makes lights blink


Timer is wired incorrectly.
Single pole wiring does not use the red wire. Red wire is capped off.
Copy following link to see specific wiring illustrations for ST01C timer:
http://waterheatertimer.org/ST01C-program.html#wire

Related but not same problem:
In some 3-way wiring installations, if the power goes out, or if the bulb burns out, the timer can click. The lights do not blink because power is out or bulb is bad. Simply flip the 3-way switch to stop clicking sound. Then change light bulb, or wait for power to resume.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Jul 04, 2012 | Intermatic Inc. ST01C Digital In-Wall...

1 Answer

Put a new bulb in that i got from e-bay, tv switches on perfect but after a little while it turns itself off then red and green light start to flashing. i don't know what the problem is ????


Hello, I try to help. But your questions not spesific.
Below are conditions lamp indicators that appear blinking and solutions (for samsung) :

1. If Timer and Lamp blinking --> Auto timer on/off was been set, picture will appear ~ 25 second.
2. If Timer and Standby/Temp blinking --> A cooling fan inside the set is not operating properly.
3. If Lamp and Standby/Temp blinking --> The lamp cover on the rear of the set is not installed properly.

I hope that solve your problem.
Thanks

Mar 14, 2011 | Televison & Video

1 Answer

Hello I have a Samsung TV Model# HL50A650C1FXZA I have 3 lights blinking 2 green and 1 red light what is the problem


Hello, I try to help. But your questions not spesific.
Below are conditions lamp indicators that appear blinking and solutions:

1. If Timer and Lamp blinking --> Auto timer on/off was been set, picture will appear ~ 25 second.
2. If Timer and Standby/Temp blinking --> A cooling fan inside the set is not operating properly.
3. If Lamp and Standby/Temp blinking --> The lamp cover on the rear of the set is not installed properly.

I hope that solve your problem.
Thanks.

Feb 22, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

My intermatic time HB51R flashes on and off when on the timer position (2,4,6, hours) it keeps the lights lit on the "on" position and "off" on the off position


I think the timer's photoelectric eye is getting too much light from the Load it turns on.
To check this, set timer at 2 hours, and then put black tape over the photoelectric eye so timer senses that it is dark and turns ON.
If timer does not blink with black tape, then problem is too much light with will cause on-off cycling of the timer.
If timer blinks with black tape over the eye, then timer is suspect. Exchange timer for another one.

Dec 05, 2010 | Intermatic Outdoor Timer/Photo Control...

1 Answer

My yard stake is a tower with 6 outlets and a single button to set, the brand is Holiday Living. I can't get it to come on at dusk and run for 4 hours without the lights blinking. I want a constant...


Put black tape over photo electric eye and see if lights stay on without blinking.

Dusk-type yard stake has photo electric eye, which is visible as round glass ball.
Lights from circuit can cause photo-eye to think it is daylight, so circuit turns OFF.
Moment later, photo-eye thinks it's dark and lights click back ON

Usually 6-outlet yard stakes have 4 top outlets controlled by timer.
Normally bottom 2 outlets are ON full time.
Make sure bottom outlets are not blinking also, which implies problem with outdoor circuit or basic timer problem.
Check circuit with inexpensive circuit analyzer from Home Depot electric department.

Photoelectric eyes go bad easily, but usually they don't blink.
They stick ON or OFF.

Nov 29, 2010 | Solar Noma 7 Day, 6 Event Outdoor Timer -...

1 Answer

I have a wd52525 the status light keeps blinking


There are 3 different LEDs on the front of this televison. The TIMER will blink green. The STATUS will blink orange and the LAMP will flash red or orange depending on if there is a failure or if the lamp timer is showing over 5000 hours.

If I answer your question directly and the status is blinking a steady orange light, then you have left the side filter cover or the front lamp cover off or they are loose.

Also holding the menu and device buttons together until the timer light blinks will reveal a code that will help in diagnosing your problem. Goodluck.

Jul 04, 2010 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Turn on the TV and only Timer light is on , no sound & picture


after holding down the menu and device the led will blink a two digit error code such as 3 blinks pause then 4 blinks then repeat that sequence a couple of times. Need that blink code to help let you know whats going on. The 34 code means lamp abnormality which translates to the power Pwb capacitors have most likely failed.

Jan 23, 2009 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi MSH09TW Air Conditioner Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Heating & Cooling Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

NOEL
NOEL

Level 3 Expert

8549 Answers

Vernon Taylor

Level 3 Expert

7437 Answers

Are you a Mitsubishi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...