- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Whitte disply might indicate a poor disply a faulty display or the error in the main board.
The last you can do before getting help for estimation from Nokia care is to open the set remove, clean and set back with the battery taken out for some time,.
you'll need to contact Dell support for this one. they will be able to help you request a password that you can use to reset/clear the hard drive password. After it is reset, you may then set a new hard drive password if preferred. Be sure that you have the ownership information of the system in order to get help from Dell about this issue.
mcdevito75 here, I figure you have buttons on your watch, press the MODE button see the disply blinking, now press set for each function, after each function is set presss MODE to move to the next function, when done press MODE again to see steady display.
remove the card, go to setup utility in disply mode section use the AGP or PCI disply setiings or auto then save settings. turn of pc, install the card and then reboot, this time system will boot up, actually system boots but no display is being given.