I have a manual hp ipaq pocket pc 2003 pro w/outlook 2002

it is useless now, the world moved on, and ended this device.
no support, HP will tell you the same.
google can find 2002 MANUALS NOW GONE FOR EVER AT HP.COM
MOST ARE DEAD NOW. FOR SURE BATTERY AND LCD DEAD.

is not outlook now dead?, MS buried it long ago?
(ever think there is HP driver needed?)
ask here at HP.
nobody uses, Ipaqs in USA< its 100% Obsolete now here.
fixya is not HP,
so...... when fiddling with relics, be best to as real HP folks no?

https://h30434.www3.hp.com/

Connect to a Computer

You can wirelessly connect to your personal computer using an infrared connection.
You can physically connect your iPAQ Pocket PC to your personal computer using Microsoft ActiveSync and a USB cable.
You must have Microsoft Outlook to operate your iPAQ Pocket PC using Microsoft ActiveSync on your computer. If you do not have Outlook, install the Microsoft Outlook software from the HP iPAQ Pocket PC Companion CD.

Microsoft Outlook Express will not work with the iPAQ Pocket PC and ActiveSync.

What book/manual are you talking about?

emachine D6419 can be found at;
http://global-download.gateway.com/GDFiles/Document/User%20Manual/User%20Manual_eMachines_1.0_A_A.zip?acerid=633933437244339685&Step1=DESKTOP&Step2=D SERIES&Step3=D6419&OS=ALL&LC=en&BC=EMACHINES&SC=PA_6E

hp iPAQ Pocket PC h1910 - Reference Guide at;
http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000002238.pdf.

Good luck and post back.

In order to sync any iPAQ with Windows Vista, you will need to download and install Windows Mobile Device Center 6.1 from http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx.

Activesync will only work for XP Operating Systems and earlier.
Notes

• To find out whether your version of Windows Vista or Windows 7 is 32-bit or 64-bit, click Start, right-click Computer, and then click Properties. The version is listed after System Type.
• You can use Windows Mobile Device Center 6.1 only with phones running Windows Mobile 2003 or later. ActiveSync and Windows Mobile Device Center won’t work with Windows Embedded CE 4.2 or 5.0, Pocket PC 2002, or Smartphone 2002 devices. (To see which Windows Mobile operating system you’re using, and if your phone doesn’t have a touch screen, click Start > Settings > About. If your phone has a touch screen, click Start > Settings > System tab > About.) To sync content to any of these devices, you must use a USB or serial cable and your computer’s Internet connection and File Explorer.
• You must use Microsoft Outlook 2002, Outlook 2003, or Office Outlook 2007 to sync your e-mail, contacts, tasks, and notes from your computer.
• You must use a USB cable to connect your phone to your computer the first time you use Windows Mobile Device Center to sync.

1. Plug the charger adapter into the charging port on the bottom of the HP iPAQ Pocket PC.
   Figure : Charging the battery
2. When the power indicator on the top of the HP iPAQ Pocket PC turns solid amber, the unit is fully charged and can be disconnected from the AC adapter (approximate time to fully charge a unit is four hours).

NOTE: The amber charge light blinks while the battery is recharging and turns solid (nonblinking) when the battery is fully charged.In the event of a low backup battery warning, charge the unit immediately before removing the main battery to avoid data loss. To view the amount of charge left in the backup battery, tap Start, Settings, the System tab, and Power.
Charging with the universal desktop cradle and AC adapter Use the universal desktop cradle to charge the HP iPAQ Pocket PC, or synchronize the HP iPAQ Pocket PC with a computer.
Follow these steps to charge the HP iPAQ Pocket PC using the universal desktop cradle:

1. Plug the AC adapter into an electrical outlet and connect the other end of the AC adapter to the AC connector on the universal desktop cradle.
2. Connect the serial or USB cradle cable into the appropriate port on the desktop PC.Figure : Connecting with the cradle
3. Slide the bottom of the HP iPAQ Pocket PC into the cradle and push firmly to seat it.

CAUTION: To avoid damaging the HP iPAQ Pocket PC or the cradle, make sure the pins are aligned before pushing the HP Pocket PC into the cradle.

Figure : Charging with the universal desktop cradle

1. AC adapter into electrical outlet
2. AC adapter into universal desktop cradle
3. HP iPAQ Pocket PC into cradle

NOTE: The amber charge light blinks while the battery is recharging and turns solid (nonblinking) when the battery is fully charged.There are stabilizers located in the universal desktop cradle that assist in aligning the unit when there is no expansion pack attached. When placing the HP iPAQ Pocket PC with an expansion pack attached into the universal desktop cradle, the stabilizers will be pushed down by the expansion pack. To release the stabilizers for use without an expansion pack, press the button on the back of the cradle.
Charging with the optional USB Autosync cable Charge the HP iPAQ Pocket PC using the optional USB Autosync cable by connecting the Autosync cable to the HP Pocket PC and the personal computer. The HP Pocket PC will be charged using power from the personal computer.
For more information on charging the HP Pocket PC using the optional USB autosync cable, from the Today screen, tap Start, Settings, the Systemtab, Power, the USB Charging tab, Settings, and Help.
Charging a low battery The HP iPAQ Pocket PC will not turn on if the battery has a low charge (less than 3.2 Volts). Fully charge the battery prior to using the HP Pocket PC.
If the charge on the battery goes below the 3.2 Volts as a result of not being connected to the universal desktop cradle or the AC adapter, no damage will occur to the battery. However, the HP iPAQ Pocket PC charge indicator light will not flash until the battery reaches the minimum charge of 3.2 Volts and a normal reset is performed.
Follow these steps to charge and reset the HP iPAQ Pocket PC:

1. Connect the HP iPAQ Pocket PC to an A/C power supply.
2. Charge the battery to the minimum level of 3.2 Volts (this will take 5 to 30 minutes depending on the current charge level).
3. Perform a normal reset by using the stylus to lightly press the Reset button on the bottom of the HP iPAQ Pocket PC.
4. Turn on the HP iPAQ Pocket PC.

Keep the HP iPAQ Pocket PC connected to the universal desktop cradle or AC adapter when it is not in use.

Don,t need it anymore I ought another pda

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&contentType=SupportManual&docIndexId=179111&prodSeriesId=322908&prodTypeId=215348
Copy and paste into your browser.

It has to be set upo to be your defualt email program for the sync to work..... In OUTLOOK on your PC click on Tools, Option, Other check the box 'Make Outlook default Email Program'

The default e-mail client on pocketPC 2003 is the "inbox" which is merly a utility for retreiving & sending e-mail. There is no "outlook 2002" on pocket PC's. The Outlook 2002 installation cd comes with most iPaqs and is intended for your pc, not your ipaq.

this should work OK