Replacing printhead on Kodak ESP 5 Printer

you may try to clean the printhead and recalibrate the printer. if this will not correct the problem, you need to replace the printhead. I suggest contacting Kodak technical support to have a replacement printhead.

Please contact Kodak 18004216699

You'll get a free printhead replaced

Try cleaning the printhead.
Press Menu > Select maintenance > Select clean printhead.

If still black does not print, call Kodak tech support, printhead will be replaced free of charge

Click on menu on the printer,scroll down and choose clean printhead or go to maintenance and then click on clean printhead .After that try to print. If issue persists,call kodak @ 1800 421 6699 and they will replace the printhead for you free of cost.Printhead is the part which holds the cartridges and has 4000 nozzles which sucks ink from cartridges.It Might have gone bad

Try cleaning the Printhead by pressing the Menu then clean Printhead
Try reseating the inks
Try reseating the printhead (for instruction on how to remove the Printhead visit www.kodak.com/go/printheadsupport)

If the above steps didn't resolve the problem call 1800 421 6699 they will replace the Printhead for you

try to reseat printhead . you can refer to www.kodak.com/go/printheadsupport on how to install the Printhead properly. still issue persists,Kodak will replace the printhead or printer for you free of cost as esp series printers are under warranty.

Hello,

It means it has "paper jam"error message. This is a common issue w/ the ESP printers of Kodak especially if its brand new.


Try the steps below.


1.Open the printer access door.
2.Remove the black and color ink cartridges.
3.Reseat the printhead.

a. Lift the printhead release latch
b. Reseat the printhead, pushing firmly on the white label on the printhead (if provided) or the center of the printhead, until it clicks into place.

NOTE: You may also visit www.kodak.com/go/printheadsupport for demonstration on reintalling the printhead

4. Close the access door.
5. wait for the printer to initialize.

If issue persists, the printer itself needs to be replaced. Call 1.800.421.6699

Thanks

Neerak21

open printer access door.remove printhead and cartridges again reseat both of them.. press copy $ cancel for 5 seconds and wait for caliberation sheet to print.. or if u have connected ur desktop, open kodak home center, go 2 maintenance and click on clean printhead. now see if ur documents are printing properly. if not kodak will replace ur printhead.

To install the printhead and ink cartridges in the:

• ESP 3 printer, see the Interactive Product Demo.
• ESP 5, ESP 7, ESP 9 printers and 5000 series printers, see Installing a New Printhead.

Additional search terms: print head, tank, replace

To install the printhead and ink cartridges in the:

• ESP 3 printer, see the Interactive Product Demo.
• ESP 5, ESP 7, ESP 9 printers and 5000 series printers, see Installing a New Printhead.