NEED A USER GUIDE FOR A P145PD03P2AA

You can download it from here: http://content.giantintl.com/manuals/Moto/T280_User_Manual.pdf

Here is a link to the user guide for the XTN style radio. http://www.123radios.com/manuals/xtnmanual.pdf

Programming instructions begin on page 18. You will need to set the frequency and interference eliminator code (PL code) the same on all the radios.

When you enter programming mode, you can use the menu button to walk you through the various options you can program.

Best regards.

Here is a link to the user guide for the T4500 radio: http://www.giantintl.com/radiopdfs/manuals/US/T4500.pdf

A few tips: Set your frequencies to be the same on both radios. Put your code and any special features on Zero or Off, until you feel comfortable with the use of the radio and are ready to turn them on.

Best regards.

Here is a link to the user guide for the T289. It is the closest we have fofound to the T200 guide: http://www.motorola.com/mdirect/manuals/T289_User_Manual.pdf

It may be of assistance to you. Honestly, we were thinking the early model T200 and T250 did not have the interference eliminator code., just 14 channels. However, if you are experiencing other numbers, it is possibly the code.

Best regards.

Here is a link to the user guide http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T56XX_57XX_User_Manual_E.pdf Programming instructions begin on page 21

Best regards.

Check the programming of your interference eliminator code and Qt filter. Both need to be set the same on each radio.

Here is a link to the user guide: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T56XX_57XX_User_Manual_E.pdf

Best regards.

Search on ebay and see if anyone selling some of these would photocopy the manual for you for a fee.

You need to verify you have the frequency, code and Qt filter set identically. Also, check your batteries to see if they are good.

Here is a link to the user guide: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T59xx_User_Manual_E.pdf

You should be able to set the radio back to a simple setting with the code and Qt filter shut off (zero), this would tell you pretty quickly if your radio will communicate. If they will not communicate with the frequency set the same, and the other features turned off, you have a battery or radio problem.

Best regards.

It is likely the radio sare not set identically. Check your frequency, code and Qt filter settings; followed by checking your batteries.

Here's a link to the user guide: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T56XX_57XX_User_Manual_E.pdf

Best regards.

Your radio is in scan mode. You can shut off scan by referring to page 8 in the user guide http://www.giantintl.com/ContentManage/manuals/Moto/T4500_User_Manual_E.pdf