Printing problem When i give print only first page i get proper print in second page print light and after 3-4 print i get blank print

I have seen this happen when the Default paper size is set to A4 when the paper is Letter size. Also try a mains reset, disconnect from the wall outlet for 5 minutes.

Please adjust paper size in printer properties.

That sounds like maybe a printer cartridge problem. Perhaps the ink flow is not working properly.

If the first line of the half printed matter is in the same possition as on original problem with toner cartridge. or the first line is actually the first
line in original may be the problem with formater board. Anyway check for paper settings.

Have you checked the print que
Printer problems can be a real hassle.
From time to time, due to document layout or settings on your computer, in your software of choice, or even on your printer, a blank page may get "printed" with the rest of your document.
Fortunately, this issue is a simple one to troubleshoot.
Click "Print Preview" when you are finished with your document and ready to print.
Observe your document.
If you see an extra, blank page, you have created a second page.
To delete the second page, close Print Preview, go back into the document and eliminate any blank lines in your documents that you may not need.
You may also find an inadvertent page break at the end of your document.
Place your cursor on its symbol and delete it.
Locate the symbol by clicking on the Show Formatting paragraph icon in the toolbar.


Circumvent this "ghost page" if you do not see a second (or additional) blank page in Print Preview.

Specify the number of pages you wish to print, within the Print dialogue box.
This is typically done by selecting the "Print From" option, then entering the page numbers desired.
If your document happens to be ten pages (without, of course, that final blank page), then enter in the "Print From" field the numbers "1-10".
This will print only pages 1 through 10, without an eleventh (blank) page.

Run a head cleaning cycle by pressing ink button for 3 seconds or longer. Try printing after 3 cycles, if getting blank pages still. Nozzles are clog, better get a new one than having it fix, more cost effective.

1.check weather its printing color/mono print out other than lables..
a. if it is not printing, give demo print from printer
b. if not printing perform prihead nozzle clean,check which colour is not printing, replace related print head.
2.If not printing labels/doc check drivers,

paper size problem .

hi,check your printing setting and then print.
or....
uninstall the printer then install the printer again then printer has default setting and print the paper.
sometimes printer current pages print wich is selected by setting.you must select all the pages.
to change the setting,,,
1-open control panel then open printers and faxes then check seeting.

HP LaserJet 1022 Printing Blank Pages