Lost my tv manual moved house unable to ajust and tune and find freeview channels thankyou

You need to do a Full Factory Reset tuning rather than just a rescan.

Rescan simply looks at the place holders where the old channels were stored and refreshes them. A Factory Reset (A.K.A. Shipping Condition) wipes the channel memories and starts again fresh.

Go in to analogue tuning. Tune just the analogue side of the TV.

Hello Keith,

Yes, it has a built-in DVB-T* tuner which is what you need to tune Freeview channels. It also has an analogue tuner if required.

* Digital Video Broadcasting - Terrestrial

You can view the full specifications for this model by clicking on the link below and you can download a user manual from there if you need one.

http://www.sony.co.uk/product/t32-l-series/kdl-32l4000/tab/manualpopup?section=ODW+SS+en_GB+Support+New&externalUrl=ftp%3A%2F%2Fftp.vaio-link.com%2Fpub%2Fmanuals%2Fconsumer%2FKDL-32L40xx.pdf

If you already own this TV and are unable to receive or tune Freeview channels, please let me know and I will be able to assist you with this.

Hope this helps

Regards,
BElectric

WEll it really depends upon the make and model of your TV as to how to tune it in.
Please send a fresh message with more details. Thank you.

Buy a digital antena or have roof antena,get better receptions and stable Hz.Rescan when get better signal should get it back an it stable's.

Check and replace the tuner.
http://elektrotricks.blogspot.com/
http://electrotechnician.blogspot.com/
http://electronicshelponline.blogspot.com/
http://homenol.blogspot.com/
Please visit these sites to get some details.

Download a User Manual or Quick-Start Guide free from www.skymediauk.co.uk/datasheets/manuals.php

What is the model of the TV please?

Hi.

Connect the freeview box to tv using scart lead tv will automaticaly change to freeview channel when digibox is switched on if you connect this way so no tv tuning will be required.

Hi.
Modern day freeview boxes rarely have A modulator in them so you can not tune it to a channel on your tv it must be connected using scart lead.
Most freeview boxes have 2 scart sockets one for VCR & one for TV plug your scart leads in to the scart sockets of freeview they will be labled TV & VCR.
The scart labled TV goes to scart socket on the TV labled AV1 or 1
The scart labled VCR goes to scart socket on VCR labled AV or IN
Now the aerial leads From wall socket to ANT in on freeview.
Then from RF out on freeview to ANT in on VCR.
Then RF out on VCR to ANT in on TV doing this will enable you to put TV on 9 to watch tapes.

The final scart will be from DVD to TV socket marked AV2

You will need to put TV on AV channel to view freeview.
To record freeview you must put VCR to EITHER line.av,aux. it will be one of those different manufacturers call them by varying names.
I have done this banking on your tv having 2 scart sockets if it only has 1 let me know & I will tell you how to wire it differently.
Please state make & model of TV set & VCR & what connections are available EG scart, Phono, Svhs etc.

http://dysonmanuals.llc.nu/

Chris..