Question about Mitsubishi WS-65869 65" Rear Projection Television

1 Answer

Mitsubishi 65 inch rear projection diamond

Hi, My electric went out while my tv was on. When it came back on the green power lighr keeps blinking and I can't turn the tv on. I tried unplugging it overnight but the same thing keeps happening, continuious blinking and I can't turn it on. Thank You, Joe

Posted by geusepinna on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Its the circut board that leads into tv from power cord , i had bought mitsubishi65819 black diamond gray 65inch for $54 ,is under the warranty the board cost $350 , labor $200 but this depends on where u live ,either way it was a steal for me ,but yea i had same problem when u turn tv on it shuts down like not even 2seconds i had tech come out and he had to take the board to get it repaired ,its not available he said but its repairable , was a sears tech so sears can repair it

Posted on Mar 26, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Our Mitsubishi projection tv went out one day. When we went to turn it back on all it does is blink the green light for a few seconds and then shuts off. What could it be? Where can we look to see where...


MOST OF THESE SETS HAVE A SELF DIAGNOSTIC:

UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ONFOR A MOMENT AND GOES OFF.

PRESS AND HOLD "device"(input) and "menu"buttons on front of tv for at least 5 seconds and then release both together.


Watch for power light to blink in a sequence:

1 blink-then 2 blinks-------no error

2 blink-then 1 blink-------X-ray protection

2 blink-then 2 blink-------SHORT PROTECTION*******

2 blink-then 3 blink---------deflection circuit problem

2 blink-then 4 blink---------vertical circuit problem


******2, then 2 is most common---usually means one of the fuses that protectthe Convergence IC or IC's is blown---set will detect no voltage to convergenceIC and shut down.


SET WILL REPEAT BLINK ERROR CODE UP TO 5 TIMES ANDTHEN TO GET IT TO REPEAT MORE YOUHAVE TO UNPLUG SET AND TRY TO TURN ON AGAIN.


IF IT IS 2 AND THEN 2---USUALLY
CONVERGENCE CIRCUIT PROBLEM

let me know what you find--hope that you find 2 blinks, a pause and twoblinks--this is the most common and easiest to fix.
SD TECH

Aug 09, 2011 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Can't turn on the TV. Green light keeps blinking.


You need to change the four capacitors C9B01,C9B02,C9B10,C9B11 all 1000 MFD 16 VOLT (on the DM board which is inside the metal shield standing upright on the left looking from the back of the set)The tops of the capacitors will look puffed out making them easy to find. This is your HD tuner digital board which is trying to reboot but can't - when the green light stops blinking after a minute,than you can power on your TV.

Aug 26, 2007 | Mitsubishi WS-65613 65" Rear Projection...

1 Answer

On my tv the lighr flashes green but the screen its back


Try this..... Depress the remote power switch to off; unplug from the wall and plug it back in repress the remote on. It should power up.


ASHMAN

Jan 03, 2011 | Philips Televison & Video

1 Answer

Blinking green timer light on front nearpower button keeps blinking, tv will not turn on, unplugged for 24 hours and tried again, also hit system reset and still nothing.


Thats a common problem when the caps on the DM need replacement. They will function fine untill power is interupted then the set will not complete the boot sequence when power is reapplied and the led will just continue to blink. Hers a link to the kit that will usually repair that issue the kit comes with instructions.
http://servicemanuals.vstore.ca/product_info.php/pName/v21v19-mitsubishi-dm-repair-kit/cName/repair-kits

May 09, 2009 | Televison & Video

1 Answer

Sony Projection TV 60 XBR, wont turn on, blinking green light


This sounds like when the power came back on a surge went into your tv and burnt out the TVs main power supply or possibly burn out the flyback power converter on the TV main board!
(I am pretty sure it is either one of these things!)
Please rate answer
THANK YOU!

Jan 15, 2009 | Televison & Video

2 Answers

Blinking green light, will not power up


my 55613 tv wont turn on just blinking green light

Sep 18, 2008 | Mitsubishi WS-55613 55" Rear Projection...

1 Answer

Mitsubishi 65 inch Diamond rear projection


Sounds like your control unit has going down. its the big silver box in the rear to the left of the set.

Oct 28, 2007 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

Tv will not turn on but it constantly blinks and will not stop


You need to change the seven capacitors on the DM power supply board (inside the metal case on the left where your DTV tuner connects)They are 1000 MFD 16 VOLT capacitors and the tops are probably bulging outward because they are leaky- this is a common problem.When you lost power,the TV had to reboot itself but because of the leaky caps it never will and the green light keeps blinking.As long as you never lost power or unplugged the set the TV would of still worked.Once you change the parts and plug the set in the light will blink normaly for about a minute and when it stops blinking you can then turn on the TV.

Aug 30, 2007 | Mitsubishi WS-55859 55" Rear Projection...

Not finding what you are looking for?

Open Questions:

See all Mitsubishi WS-65869 65" Rear Projection Television Questions

Mitsubishi WS-65869 65" Rear Projection Television Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76280 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...