- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure the mute is not on, if you use more than one remote make sure none of them have the mute on. If you want to avoid repair you can use a low cost surround system as it has a separate audio path and should work for you...
You have to connect extra red & white audio cable from your TV's (or cable box, if you have one) AUDIO OUT to the Home Theater's AUX IN 2 at the back (below Video In). Set the HTS unit to AUX 2 using the AUX button on the remote control and you should be able to get sound.
The ABS control unit does need to be coded to the vehicle. After coding the control unit, an End-Belt run test must be performed. I know that you will also have transmission faults stored, because the Trans warning is set since the control unit has not been coded
and the control units communicate constantly during engine operation. The trans uses abs input for shift characteristics and helps with power reduction during evasive driving control. A dealer should be able to code and perform the end run test and usually charge about an 1hr fee. They will also need to quick delete other fault memories.
We lost the chat communication.
check this LINK to download your schematic diagram. Make sure you get all the 7 parts before you can open it.
You will need winrar and acrobat reading 6.0 or newer to view the schematic.
You have a problem in the Hi voltage or horizontal drive circuit most likly. Its a slight possiblity that the video is going out because of a cold solder connection from the flyback transformer blanking pulse to the video/sync separator circuit as it does and has happened in the past. This set should only be serviced by a trained service person as there are no real user serviceable parts inside this set. Good Luck