Hello,
There is a trick to the procedure. You have to turn the key to position
1 or the first stop on the ignition. Turn on the radio and wait between
2.0 to 3.0 hours for the radio to reset and ask for the code. From the
owners manual. My 97 takes between 2:25 and 2.5 hours to reset. Every
radio is different.
To enter the code:
After installation or when the set has been disconnected from power, the set displays "codE" when it is switched on.
Enter the 4-digit code using the preset buttons. If the correct code is entered, "on" is displayed and the set is ready to use.
If you enter an incorrect code you must enter the correct code again from the beginning.
Incorrect code
If an incorrect code has been entered "rPt" is displayed. Enter the correct code.
After three unsuccessful coding attempts the set will lock and remain locked for two hours.
"OFF" is displayed.
During this waiting period:
the battery must be connected
the ignition key must be turned to position I
the unit must be turned on
Make
sure the headlights are turned off to help prevent battery drain
(please refer to page 2:6 for information on turning the headlights
off). Enter the code again once this time has elapsed.
Goodluck!
Ryan
465 views
Usually answered in minutes!
×