My pioneer cd player has a U2 code and will not play

Yes is will. You need to attach the MP3 to one of the inputs and select that input to play it. A burned CD should work just fine.

dvd players because of copyright info can only be set to one region code and can only play dvds from that region. Some players are set at factory some allow user to reset region usually a limited no. of times.
home burnrd dvds usually don't carry that info therefore no issue. So you need to reset player for appropriate region

replace your disc and get the player service

avic-d1 is a cd player it is not a dvd player

Pioneer CD player codes for Onkyo universal remotes are: 70032, & 70101.

You can download Onkyo universal remote codes with instructions here.

I hope that helps.

Error 11 is probably the laser...;)

I have the same problem now too. It shows up error 11, 12 or 17. I tried using a cleaning CD but did not work. I think the lens needs to be replaced.

From Pioneer;

"Error code 11 is more specific, however, indicating that the player’s read laser cannot focus properly, most likely due to a fault with the disc."

Try a different CD, or you may have to have the laser cleaned.




Best of Luck.

The Pioneer component 6 CD magazine changers only play normal store bought CDs, not CDs you make yourself.
sorry.

the d2 does NOT play dvd's,the dvd rom slot is for the navigation disc ONLY. you must hook a dvd player to the RCAs.