If u r a repair technician here are some useful steps
1. check rp1 to rp13 resistance pack ( 47 ohm and 33 ohms )
2. download firmware
3. touchup the flash and font rom (U33 , U34)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there may be two problems in the logic card of the printer
1 .ONE OR MORE RESISTANCES R165 , R166 , R167 , R170 , R171 MAY BE DEFECTIVE..
2 . FIRMWARE MAY BE CORRUPTED , RELOAD IT.
I guess you are talking about a line of text printed on the T6050 when it is powered on.If this is the case you simply have a network card installed in the printer but have not connected a network cable.To resolve this problem either connect a network cable to the internal network interface or remove the internal network card from the printer if it is not being used.
hi
buy the looks of the problem it looks like you may have either faulty driver or a cable connect to the printer is not in correctlly
. I would try this test first install the Generic / text only driver and send a printer sample to the printer. if this prints ok it could be the driver your down loaded or problem with one of the line driver boards inthe printer.
×