Looking for a cansoscan 8600f for mac os 10.9.1

see here:
Canon Support Drivers CanoScan 8600F

What version of Mac OS X are you using?

There is no driver for your printer to work with OSX. It was for Windows OS only. AND Apple does not support this particular model either.Link below list support printers by Apple OSX>
http://support.apple.com/kb/ht3669

Hi Bobby
You will need to get an OS X installation DVD. Try eBay.Don't go for anything lower than 10.4 (Tiger)10.5 (Leopard) and 10.6 (Snow Leopard) should run fine on this machine.Don't bother with 10.7 or 10.8

According to Canon it is not supported.
Issue: Does my product support Mac OS X 10.5 (Leopard)?
but here is a link to try.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=235&modelid=8743#DownloadDetailAct
Solution: Mac OS X 10.5 (Leopard) Compatibility information (Non-Compatible Scanners)

Mac OS X 10.5 (Leopard) Compatibility information (Non-Compatible Scanners) Unfortunately, the chosen scanner model is not supported with Mac OS X 10.5 (Leopard). For models that are supported, please see the information below.
Compatible Scanner Models Drivers to support Mac OS X 10.5 will be available for the below models. Visit the Canon download site for the most up to date versions of the product's drivers and software.
4400F
9950F
LiDE 70
8400F
LiDE 25
LiDE 90
8600F
LiDE 35
LiDE 500F
8800F
LiDE 60
LiDE 600F

• Scanner models released after 2007 will be compatible unless otherwise noted.
• For scanners missing from the list above, if it was released prior to 2007, then it will not be supported in Mac OS X 10.5 Leopard.

Here is a link for the Mac OS 9 driver for the MFC-420cn:

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/000600/dlf000680.html?reg=us&c=us&lang=en&prod=mfc420cn_us&type2=1&os=9&flang=4&dlid=dlf000680



If you need a newer version of Mac OS , you would have to purchase it. Mac OS does not update from 9.1 to 10.X
Mac 9.1 is about 10 years old.

In May 2002, at Apple's Worldwide Developers Conference in San Jose, California, Steve Jobs, accompanied by a coffin, held a mock funeral[5] to announce that Apple had stopped development of Mac OS 9. Mac OS 9.2.2, introduced in December 2001, was the final version of Mac OS 9, and the end of the classic Mac OS.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Any of the following are good:
QuickTime with Perian
Real Player 10 for Mac OS
Windows Media Player for Mac OS X 9.0If you don't have Mac OS X, get the Windows Media Player for Mac 7.1 which runs on the Macintosh Classic OS.

VLC media player for Mac OS X
Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. – I would greatly appreciate a FixYa! rating if the solution I provided fixed or helped you fix your problem.

Thank you for using FIXYA!

Cheers!
IrishDruid

Hi there, you can download some installer online for you printer machine, just type this link to your browser:

http://www.lostmydrivers.com/printers-drivers/lexmark/

and please find below details on a bit middle part of the html page, click download. Make sure the your printer wire are plugged and use it as your default printer and have it test. Thanks. Have a nice day.

Regards,
fixyaqueen.



LEXMARK LEXMARK P4350 PRINTER V.1.0.6 MAC OS X 10.2.3 MAC OS X 10.2.4 MAC OS X 10.2.5 MAC OS X 10
Lexmark P4350 printer Driver for Mac OS X 10.2.3 - 1...
Licence: Freeware
OS: Mac OS X 10.2.3, Mac OS X 10.2.4, Mac OS X 10.2.5,
Size: 20 MB 07/13/2007 173 -
download now

http://www.macosx.com/forums/mac-os-x-system-mac-software/6438-os-x-10-1-webcam-2.html

The above website has some interesting information and mentions a couple of different websites ( ioexperts especially ) that may contribute to your success.
Let me know either way, success or failure

Oh, there's no problem. I don't have an Optio 750z, but I do have an Optio 30 and it's older. Just tested with an iBook G4 that I just have installed Mac OS X Tiger 10.4.2 in. When the camera is attaced and turned on, iPhoto will open automatically and you have the option of import the images to your computer - you can also mark the "Delete images from the camera". The camera will also appear on the Finder desktop as a removable disc. So, seems to be no need for extra software.