Turn the unit off, Then hold the function button until the time flashes. Then push the rt or lt buttons on the unit to select hour or minute, Then up or down to select the time you want.Them hit program to save the time.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Press SRC/OFF and hold until the unit turns off. 2. Press M.C. and hold until CLOCK SET appears in the display. 3. Turn M.C. to select the inital setting. After selecting, perform the following procedures to set the intial setting. CLOCK SET: 1. Press M.C. to display the setting mode. 2. Press M.C. to select the segment of the clock display you wish to set. Hour-Minute As you select segments of the clock display, the selected segment flashes. 3. Turn M.C. to adjust the clock.
Adjusting initial settings 1 Press SRC/OFF and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until CLOCK SET appears in the display. 3 Turn MULTI-CONTROL to select one of the initial settings. CLOCK SET (clock)—AUX (auxiliary input) # To return to the previous display, press DISP/BACK/SCRL. # To return to the main menu, press and hold DISP/BACK/SCRL. # To cancel initial settings, press BAND/ESC. Setting the clock Use these instructions to set the clock. 1 Use MULTI-CONTROL to select CLOCK SET in the initial setting menu. Refer to Adjusting initial settings on this page. 2 Press MULTI-CONTROL to display the setting mode. 3 Press MULTI-CONTROL to select the segment of the clock display you wish to set. Each time you press MULTI-CONTROL, one segment of the clock display is selected. Hour—Minute As you select segments of the clock display, the selected segment blinks. 4 Turn MULTI-CONTROL to put a clock right.
I dont know what deck you have but you can try this. Turn off the deck by holding the source butten then hold the function butten you will be able to turn on and off the warn for the alarm along with the clock.
turn your unit off by pressing the SRC button. then press the clock button (clock appears). press the audio (or function button) and then the hour blinks. press up or down to change setting and left or right to switch from hours to minutes. press audio button. wallah!