Question about Sony Cyber-shot DSC-W55 Digital Camera

4 Answers

Dital camera repairer in mumbai india

ABOVE MODEL CAMERA  NOT WORKING PLEASE SUGGEST REPAIRER / OTHERISED SERVICE CENTER

Posted by SURENSALVI on

  • 1 more comment 
  • Anonymous Nov 22, 2007

    i have benQDC3410 camera purchased from UAE.
    Its flash is stuck on NO FLASH mode(Logically)
    Could u suggest me the authorized dealer to repair the same?
    Or any expert ?
    i am ready to get paid service....
    bye
    waiting for reply.

  • Anonymous Nov 29, 2007

    I Have Purchase Casio Digital Camera Ex-Z1050 from USA .My Camera Also Struck Down & Now His Disply Has Been Crashed. On Disply Showing White Screen Only.

    Please Suggest Me Any Authorised Service Centre .



    My Email [email protected],[email protected]

  • Anonymous Dec 14, 2007

    WHEN I TAKE PHOTO ,THE IMAGE WILL SHOWN HALF ON SCREEN

×

Ad

4 Answers

Anonymous

Through your camera into scrap

Posted on Jul 31, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I want know any sony service center address near by mumbai(borivali)

Posted on May 12, 2008

Ad

Anonymous

CANON MASTER SERVICE CENTRE 6TH FLOOR,CENTER POINT BLDG,
S.V. RD, NEAR TRIBHUVANDAS BHIMJI ZAVERI,
(JUHU TARA ROAD-JUNCTION)
SANTACRUZ (W),
MUMBAI
MAHARASHTRA
Pin : 400054
Tel : 022 67605000-01

Contact Person : Sheetal More

Posted on Apr 09, 2008

Anonymous

I have Casio Exim Model, My friend gave me Last month as gift When he came from USA but some has put it down on floor. It creates lens problem. I don't have bill of camera. So what is solution for this problem? can any authorized dealer repair camera, If yes than give me nearest dealer contact.

Waiting for reply

Posted on Mar 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a GE cordless phone (model EX29670GE-A) but dead. I have not got the GE service center in Odish for repair. I showed the local service center but they denied to repair the phone .It is not possible...


If the repair parts are not available any more as your serviceman says, you will need to purchase a new phone. unfortunately that is common in electronics today.

Feb 26, 2015 | GE Cameras

1 Answer

Lens error report comes on screen. The camera fell from hands on to the floor. Please suggest a service centre in mumbai.


Sorry to hear about your misfortune, but you may find that if you do find a repair center, the cost of repair may approach (or actually exceed) the current value of your camera. If you can't find a repair center with reasonable cost, here are some last resort troubleshooting steps that you can try that may correct your problem. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try.

Jun 26, 2011 | Casio Exilim EX-Z750 Digital Camera

1 Answer

I am having CANON Camera SURE SHOT 80 Tele. Whenever i start camera there is one msg which only shows H and stop working further. What can i do now..


There are two conditions under which a blinking "H" will appear in the
LCD panel: (1) when the film has been loaded incorrectly or (2) when the
camera's self-test process detects an internal malfunction. If a
blinking "H" indication appears, perform the following operations in
attempt to resolve the situation:

1. Rewind and remove the film using the rewind button, then remove the
battery to clear the memory.

2. Clean the contacts at the base of the battery compartment with a
clean pencil eraser to ensure proper contact between the camera and
battery.

3. Replace the battery, power the camera back up and operate it as if
it had film loaded, pressing the shutter release.

If the "H" display stops blinking, the problem is corrected and you can
continue using the camera normally. If the blinking does not stop, or
if it subsequently returns, the camera should be examined by an
authorized Canon service facility.

For factory service, please forward your camera to the Factory Service
Center shown below. When shipping your camera, please be sure to remove
the film (if possible) and batteries. You are not required to send any
accessories or manuals when shipping the camera. Be sure to include
your name, street address (no P.O. boxes, please), telephone number, and
a letter describing the issue with the product. If it has been less
than one year since the camera was purchased, we ask that you also
include proof of warranty in the form of a copy of your sales receipt.

As we do not provide RMA numbers for service, we suggest using a
traceable and insurable service (i.e. UPS, Federal Express, Priority
Mail) to ship your camera. Please package the camera very securely in a
sturdy shipping box to prevent damage during shipment.

Please send your camera to the following Factory Service Center:

Canon Factory Service
1440 Chase Ave.
Elk Grove Village, IL 60007

Telephone: (800) 828-4040
Business Hours: Monday - Friday 8:00 a.m. - 12:00 midnight ET, and
Saturday 10:00 a.m. - 8:00 p.m. ET (excluding holidays)

Upon arrival at the Factory Service Center, your camera will be logged
in to our repair database and assigned a repair number. Next, the
camera will be examined and you will be advised of the findings. If the
required repairs are covered by the warranty, the repairs will begin
immediately. When the repairs are complete, the camera will be shipped
back to you via Federal Express or UPS.

The length of time for the repair will be dependent upon the nature of
the repair and availability of parts, if needed. Usually, warranted
repairs are completed within approximately ten to fourteen business days
of the camera's arrival at the Factory Service Center. Please be
assured that your camera will be returned as soon as possible. We
appreciate your patience and understanding in this matter.

All decisions regarding warranty coverage are made by the Factory
Service Center at the time of repair. If the repair entails something
that is not covered in warranty, or if the camera is out of warranty, a
written estimate will be sent to you at the address that you have
provided. The repairs to your camera will not begin until you approve
this estimate and make payment arrangements. If, after receiving the
estimate, you do not wish to have the camera repaired, please inform the
Factory Service Center of your decision as soon as possible. If you
decline the estimate, the camera will be shipped back to you
un-repaired.

Once you have confirmed with your shipper that the camera has been
delivered, you are more than welcome to contact us for repair updates.
Please include your name, address, and telephone number, as well as the
serial number of the camera, in all repair status inquiries. If you
prefer to contact us by phone, please see the above contact information.

Please note that our U.S. Factory Service Centers are unable to accept
packages from or return equipment to addresses outside the United
States.


Please rate our help to keep the FREE service online++++Thanks for using FIXYA

Sep 15, 2009 | Canon Sure Shot 80 Tele/Date 35mm Point...

1 Answer

Battery light flashing


Nikon has issued a service advisory on this model, but I am not very sure about the buttons not working properly. Hope you gotit repaired by Nikon's authorized service center. Please contact the nearest authorized service center.

Jan 27, 2009 | Nikon Coolpix 5700 Digital Camera

1 Answer

My screen is constantly blurry...what happened?


Press display (DISP.) button to turn the display on. This button is located on the rear of the camera and toggles the camera's LCD display. The button is usually printed with <DISP.> on the button or above the button depending on the model.
display_button.gif If pressing the <DISP.> button doesn't turn the display on, remove and replace the batteries in the camera. If this still doesn't correct the issue, the camera may need to be evaluated by the Factory Service Center.

OR

Unfortunately, the issue you describe seems to indicate that your product requires repair service. Canon has excellent service options and we are eager to provide any assistance you may need. Links to the service options that are available for your product are listed below:


You can conveniently pre-arrange repair service with a Canon Factory Service Center through Canon's website. Search to locate a repair service center and obtain further instructions.

Nov 23, 2008 | Canon PowerShot SD1000 Digital Camera

5 Answers

Service centres in Bangalore, India


Cotact here

eSys Information Technologies Ltd.
30, Next to OPEL Garuda Show Room,
Lal Bagh Main Road
Bangalore - 560 027 Working Days MON-FRI Working Time 10 A.M-6 P.M Contact Person Jagdish Shenoy Contact Number 080-22220075

Feb 12, 2008 | Cameras

1 Answer

Minolta Maxxum 7000 35mm SLR Camera not working


Dear Minolta friends,
I have recently bought a second hand Maxxum 7000 and a AF lens, but found the body not ocntrolling the aperture while shooting. I know 7000 has someting special. Is my problem is due to lens and body compatibility or actually the malfunction of the body. I am sure the AF lens is ok since i have tried it working with another minolta af body.
Can give me an advice?

Aug 02, 2007 | Minolta Maxxum 7000 35mm SLR Camera

1 Answer

Canon Sure Shot Z155


I contacted Canon Tech Support and received the following info. There are two conditions under which a blinking "H" will appear in the LCD panel: (1) when the film has been loaded incorrectly or (2) when the camera's self-test process detects an internal malfunction. If a blinking "H" indication appears, perform the following operations in attempt to resolve the situation: 1. Rewind and remove the film using the rewind button, then remove the battery to clear the memory. 2. Clean the contacts at the base of the battery compartment with a clean pencil eraser to ensure proper contact between the camera and battery. 3. Replace the battery, power the camera back up and operate it as if it had film loaded, pressing the shutter release. If the "H" display stops blinking, the problem is corrected and you can continue using the camera normally. If the blinking does not stop, or if it subsequently returns, the camera should be examined by an authorized Canon service facility. For factory service, please forward your camera to the Factory Service Center shown below. When shipping your camera, please be sure to remove the film (if possible) and batteries. You are not required to send any accessories or manuals when shipping the camera. Be sure to include your name, street address (no P.O. boxes, please), telephone number, and a letter describing the issue with the product. If it has been less than one year since the camera was purchased, we ask that you also include proof of warranty in the form of a copy of your sales receipt. As we do not provide RMA numbers for service, we suggest using a traceable and insurable service (i.e. UPS, Federal Express, Priority Mail) to ship your camera. Please package the camera very securely in a sturdy shipping box to prevent damage during shipment. Please send your camera to the following Factory Service Center: Canon Factory Service 1440 Chase Ave. Elk Grove Village, IL 60007 Telephone: (800) 828-4040 Business Hours: Monday - Friday 8:00 a.m. - 12:00 midnight ET, and Saturday 10:00 a.m. - 8:00 p.m. ET (excluding holidays) Upon arrival at the Factory Service Center, your camera will be logged in to our repair database and assigned a repair number. Next, the camera will be examined and you will be advised of the findings. If the required repairs are covered by the warranty, the repairs will begin immediately. When the repairs are complete, the camera will be shipped back to you via Federal Express or UPS. The length of time for the repair will be dependent upon the nature of the repair and availability of parts, if needed. Usually, warranted repairs are completed within approximately ten to fourteen business days of the camera's arrival at the Factory Service Center. Please be assured that your camera will be returned as soon as possible. We appreciate your patience and understanding in this matter. All decisions regarding warranty coverage are made by the Factory Service Center at the time of repair. If the repair entails something that is not covered in warranty, or if the camera is out of warranty, a written estimate will be sent to you at the address that you have provided. The repairs to your camera will not begin until you approve this estimate and make payment arrangements. If, after receiving the estimate, you do not wish to have the camera repaired, please inform the Factory Service Center of your decision as soon as possible. If you decline the estimate, the camera will be shipped back to you un-repaired. Once you have confirmed with your shipper that the camera has been delivered, you are more than welcome to contact us for repair updates. Please include your name, address, and telephone number, as well as the serial number of the camera, in all repair status inquiries. If you prefer to contact us by phone, please see the above contact information. Please note that our U.S. Factory Service Centers are unable to accept packages from or return equipment to addresses outside the United States. We hope this information is helpful to you. Please let us know if we can be of any further assistance with your Sure Shot Z155.

Apr 18, 2007 | Canon Sure Shot Z155 35mm Point and Shoot...

1 Answer

Fer


I received this information from Canon Tech Support--- There are two conditions under which a blinking "H" will appear in the LCD panel: (1) when the film has been loaded incorrectly or (2) when the camera's self-test process detects an internal malfunction. If a blinking "H" indication appears, perform the following operations in attempt to resolve the situation: 1. Rewind and remove the film using the rewind button, then remove the battery to clear the memory. 2. Clean the contacts at the base of the battery compartment with a clean pencil eraser to ensure proper contact between the camera and battery. 3. Replace the battery, power the camera back up and operate it as if it had film loaded, pressing the shutter release. If the "H" display stops blinking, the problem is corrected and you can continue using the camera normally. If the blinking does not stop, or if it subsequently returns, the camera should be examined by an authorized Canon service facility. For factory service, please forward your camera to the Factory Service Center shown below. When shipping your camera, please be sure to remove the film (if possible) and batteries. You are not required to send any accessories or manuals when shipping the camera. Be sure to include your name, street address (no P.O. boxes, please), telephone number, and a letter describing the issue with the product. If it has been less than one year since the camera was purchased, we ask that you also include proof of warranty in the form of a copy of your sales receipt. As we do not provide RMA numbers for service, we suggest using a traceable and insurable service (i.e. UPS, Federal Express, Priority Mail) to ship your camera. Please package the camera very securely in a sturdy shipping box to prevent damage during shipment. Please send your camera to the following Factory Service Center: Canon Factory Service 1440 Chase Ave. Elk Grove Village, IL 60007 Telephone: (800) 828-4040 Business Hours: Monday - Friday 8:00 a.m. - 12:00 midnight ET, and Saturday 10:00 a.m. - 8:00 p.m. ET (excluding holidays) Upon arrival at the Factory Service Center, your camera will be logged in to our repair database and assigned a repair number. Next, the camera will be examined and you will be advised of the findings. If the required repairs are covered by the warranty, the repairs will begin immediately. When the repairs are complete, the camera will be shipped back to you via Federal Express or UPS. The length of time for the repair will be dependent upon the nature of the repair and availability of parts, if needed. Usually, warranted repairs are completed within approximately ten to fourteen business days of the camera's arrival at the Factory Service Center. Please be assured that your camera will be returned as soon as possible. We appreciate your patience and understanding in this matter. All decisions regarding warranty coverage are made by the Factory Service Center at the time of repair. If the repair entails something that is not covered in warranty, or if the camera is out of warranty, a written estimate will be sent to you at the address that you have provided. The repairs to your camera will not begin until you approve this estimate and make payment arrangements. If, after receiving the estimate, you do not wish to have the camera repaired, please inform the Factory Service Center of your decision as soon as possible. If you decline the estimate, the camera will be shipped back to you un-repaired. Once you have confirmed with your shipper that the camera has been delivered, you are more than welcome to contact us for repair updates. Please include your name, address, and telephone number, as well as the serial number of the camera, in all repair status inquiries. If you prefer to contact us by phone, please see the above contact information. Please note that our U.S. Factory Service Centers are unable to accept packages from or return equipment to addresses outside the United States. We hope this information is helpful to you. Please let us know if we can be of any further assistance with your Sure Shot Z155.

Mar 13, 2007 | Canon Sure Shot Z155 Caption 35mm Point...

2 Answers

Flashing H


I have the same problem. The problem is with the zoom. When you turn your camera on, before shooting a picture, zoom slightly (but do not return to the initiall zoom setting) and shoot your picture. It works.If you need to zoom more, don't worry, any zoom change will alow you to take as many pictures as you want.The camera displays H only if you shoot a picture after turning on your camera, without previously zooming in and out outside the automatic zoom setting.

Feb 13, 2007 | Canon Sure Shot Z155 Caption 35mm Point...

Not finding what you are looking for?
Sony Cyber-shot  DSC-W55 Digital Camera Logo

Related Topics:

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

 Larry
Larry

Level 2 Expert

126 Answers

 MikeWang
MikeWang

Level 2 Expert

42 Answers

Paul Green

Level 2 Expert

527 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...