Hello,

Carbon track on fader 1 is open because of wear or just broken, if you are getting sound then the ground carbon track is out but certainly the problem lies in the pot.

Nov 04, 2013 | Allen & Heath Xone:42 DJ Mixer

1 Answer

Only half the volume on the left channel of the mixer. Why? :(

Does the left meter do the same thing? If the meter matches the right one, I would suspect the volume potentiometer on the powered speaker. Try exercising the volume knob. There might be some oxidizing on the potentiometer.

Oct 25, 2017 | Allen & Heath Xone-22 2 Channel Dj Mixer

1 Answer

Have a Behringer 1202 Xenyx FX, balanced cable into a new windows 7 PC and keep getting hiss. When I raise the gain, mic or master volume the hiss is more awful. my internet broadcasts sound awful. what am...

You are running your balanced cable into a windows 7 PC? What interface are you using... not the line input on the PC I hope as it is NOT balanced... it is Stereo input with UNBALANCED input. If you tie the mixer using a balanced to 1/8 inch balanced connector you will get plenty of hiss since you are driving the stereo channels oppositely. For high quality, get a good audio interface that runs on the USB of the PC. If you can tolerate a bit of noise but wire it correctly, then you will need to use two UNBALANCED lines out of the mixer for L and R and merge them to a stereo 1/8 inch plug for the PC.

Jul 10, 2011 | Behringer Xenyx 2222fx Premium 22 Input...

1 Answer

6505 +112 has a bad hiss with nothing plugd in

Some hiss at high gain settings is normal. If you get objectionable hiss at 1 o'clock settings of gain, that is too high. Electronics has noise that is "statistical" in nature due to physics that we can't get around in design. Most hiss is created in the preamp area and swapping tubes in the first stage might help. By varying the volume controls and observing the level of the hiss, we may be able to analyze the offending staage of amplification. ALso turning up the treble controls will increase the hiss, as it is mostly in the higher pitches.

Jun 26, 2011 | Peavey 6505 Plus 112 60w All Tube Combo...

1 Answer

I have an allen and heath Xone 22 Mixer. Its great, except due to the lack of a power switch I pulled the ac adapter/power cord out too many times and now it has a really bad, loose connection. It works,...

Usually the connector that is board mounted is the problem. I would OPEN the unit as there may just be broken solder at the connector inside. If the connector requires replacement, find one at Digikey.com by searching for "power connector coaxial".

Hint: In the future install one of those little lamp switches that are in a little plastic box with knurled knob sticking out the sides. ONLY break ONE wire from the adapter to avoid getting the connections reversed. Since the wires are smaller than lamp cord, tack solder the wires to the piercing points of the switch .

Apr 11, 2011 | Allen & Heath Xone-22 2 Channel Dj Mixer

1 Answer

I am looking for a service manual for and Allen Organ model 301B. I am having trouble with the capture system, The manual pistons set just fine but the general pistons will not set when you push one all...

Have you tried contacting them here:http://www.allenorgan.com/www/company/service_support.html

Nov 13, 2010 | Allen & Heath Xone:92 DJ Mixer

1 Answer

Mic section, lights and filter section quit working

Sounds like it MIGHT be a power supply problem. Needs service!

Aug 27, 2009 | Allen & Heath Xone:92 DJ Mixer

Not finding what you are looking for?

View Most Popular

Xone-22 2 Channel Dj Mixer

Music

My light is flashing on the LFO Filter, On my Allen&Heath xone 32 mixer! is this a normal function? as I only just bought it second hand and don't use the LFO Filter I don't know if a repair is needed

The Music

Open Questions:

0 Answers

schematic xone-22

Jan 04, 2014 | Allen & Heath Xone-22 2 Channel Dj Mixer

0 Answers

Xone 22 (DJ mixer) power supply connection is loose, turns of sporadically while in use.

Mar 03, 2011 | Allen & Heath Xone-22 2 Channel Dj Mixer

Ask a Question

Usually answered in minutes!

Are you an Allen & Heath Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Allen & Heath Xone-22 2 Channel Dj Mixer? Or just drag it here!

Xone 22 hiss - Allen & Heath Xone-22 2 Channel Dj Mixer

Add Your Answer

Attachments: Added items

Related Questions:

My light is flashing on the LFO Filter, On my Allen&Heath xone 32 mixer! is this a normal function? as I only just bought it second hand and don't use the LFO Filter I don't know if a repair is needed

I get a static buzzing noise out both speakers. it stops if I hold the plug cable or master out cables? turntable wires are grounded. help!

CHANNEL MONTIOR LIGHT WILL NOT STOP FLASHING

Allen & heath xone 42 fader problem channel 1

Only half the volume on the left channel of the mixer. Why? :(

Have a Behringer 1202 Xenyx FX, balanced cable into a new windows 7 PC and keep getting hiss. When I raise the gain, mic or master volume the hiss is more awful. my internet broadcasts sound awful. what am...

6505 +112 has a bad hiss with nothing plugd in

I have an allen and heath Xone 22 Mixer. Its great, except due to the lack of a power switch I pulled the ac adapter/power cord out too many times and now it has a really bad, loose connection. It works,...

I am looking for a service manual for and Allen Organ model 301B. I am having trouble with the capture system, The manual pistons set just fine but the general pistons will not set when you push one all...