Since upgrading my N95 8GB firmware from 11.* to the latest 30.* I am unable to establish a WIFI connection. It will find WIFI spots and prompt me to enter the key but doesn't get any further. This affects all WIFI and I have deleted the connections various times. Since I am unable to restore to 11.* I seem to be stuffed unless a solution is available. SOS

Sameer, First thing to do is establishing some facts of this router. Please look at the labels at the bottom of the unit and let me know the firmware version. Something like v1, v2 or v4. Pls look here for the example http://www.tp-link.com/lk/Article/?id=46.

You now have to connect the router to a pc with a network cable, that pc is NOT connected to the internet. For instance with a separate laptop, disable the wifi. The network cable connects the router (one of the LAN connections) to the pc.
Invoke a browser and write in the address line 193.168.1.1 with ID admin and password admin. This should open the service program from the router. Go to Firmware upgrade. And follow the rules. Generally you have to check the latest firmware in the TP-Link site and download that file to your pc. IF you have any questions we are always here to help.
Success, Fred

you dont't update firmware. screen play dx latest firmware lot of bugs and not respond remote controller after 30min playable movie.

may find this page helpful. http://www.dd-wrt.com/wiki/index.php...om_a_Bad_Fl ash Its not for the TP-Link router but the same principle could be applied to you with the correct firmware. Its worked for me on more than a few occasions. Providing you can ping the router via a lan cable then the chances of recovering it are very high.

Error 800: Unable to establish VPN connection

This issue may be caused by a router that has outdated firmware.

Make sure that port 1723 is opened on your router.
For VPN connection , you can try opening port 500, 443-447, 10000-20000 and important port 1723 on your router.

I will suggest you to upgrade firmware on your Linksys router.
After upgrading the firmware, reset the router to factory default and reconfigure it manually.
Open the ports mentioned above and see if that works.

See How to upgrade firmware on Linksys router.

See How to setup Linksys router

You can try to change channel on the router
Connect Belkin router with a Cable to the computer Open router router interface with its IP address Goto wireless settings and change Channel to 6 / 11 and apply settings You can also try to disable Wireless security to check if it connect without security Check for the latest firmware for your router and upgrade it.
Hope this help, Or you can ask for help

do firmware upgrade.

1. Please verify the model and version of the router underneath it.
2. Go to http://kbserver.NETGEAR.com/downloads_support.asp and select the model of the router.
3. Please click on the appropriate version of the router.
4. Select the link of the latest firmware. Please click on the button Right-click and Save to Download.
5. Save the file to the Desktop.

Note: Please perform firmware upgrade with wired or Ethernet connection only. Before you upgrade, write down all current settings as you need to enter them manually after upgrading.

6. Using the computer hardwired on the router, open any web browser like Internet Explorer or Netscape Navigator.
7. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
8. A window will prompt for a username and password. The default username is "admin" and the default password is "password".

Note: Username and password are case sensitive. If it does not take password as the password, you might have changed it when you ran the NETGEAR Setup CD so please try other passwords.

9. Click on Maintenance and then Router Upgrade.
10. Click Browse and locate the upgrade file in your Desktop. Click Upload.
11. Please wait for the router to reboot.
12. Reset the router.

a. Please push the reset button at the back of the router and release after 30 seconds.
b. Unplug the power adapter for 10 seconds and then please plug it back in.

Hi,

I had the same problem as yours. Here's how I solved it. First you'll need to download the blackberry software from sasktel website. Just google it and you'll find it. Once you've downloaded it here's what to do:

1. Download the latest firmware to your PC
2. Install the firmware onto your PC that is running BlackBerry Desktop Manager
3. Go to c:\Program Files\Common Files\Research In Motion\Apploader and delete the vendor.xml file. If you are using Desktop Manager 4.7 or higher you must also disconnect your PC from the internet.
4. Connect your device and open Desktop Manager
5. When prompted select "Upgrade Now" (If you are not prompted select Applications Loader > Update)
6. Follow the prompts and your device will be upgraded.

This solved my problem and my browser is running perfectly well on wifi.

i had that happen with my wrt54g it would go from 54 to 1 and start over again well i learned my leason there i tryed reverting to the original firmware and ended up toasting my router so dont try that :) im not to sure what the cause of this is either i do think that it in the router and not the wifi card tho

If you installed custom firmware(psp hacked firmware 3.51m33 and up ) well you cant go to the PlayStation store sorry,but you can connect to wifi spots at the internet browser.

1. Please verify the model and version of the router underneath it.
2. Go to http://kbserver.NETGEAR.com/downloads_support.asp and select the model of the router.
3. Please click on the appropriate version of the router.
4. Select the link of the latest firmware. Please click on the button Right-click and Save to Download.
5. Save the file to the Desktop.

Note: Please perform firmware upgrade with wired or Ethernet connection only. Before you upgrade, write down all current settings as you need to enter them manually after upgrading.

6. Using the computer hardwired on the router, open any web browser like Internet Explorer or Netscape Navigator.
7. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
8. A window will prompt for a user name and password. The default username is "admin" and the default password is "password".

Note: If it does not take password as the password, you might have changed it when you have run the NETGEAR Setup CD so please try other passwords. If you cannot remember the password, you need to reset the router and run the Setup CD to reconfigure it.

9. Click on Maintenance and then Router Upgrade.
10. Click Browse and locate the upgrade file in your Desktop. Click Upload.
11. Please wait for the router to reboot.
12. Reset the router.

a. Please push the reset button at the back of the router and release after 30 seconds.
b. Unplug the power adapter for 10 seconds and then please plug it back in.