Question about Philips 50PP9202 50" Rear Projection Television

1 Answer

Picture has a Glow and Looks Yellow on the Edges

The picture seems to have a glow in the middle but darkens toward the edges.  Overall, the picture seems a little yellow, but that yellow color is more pronounced along the edges and corners of the screen.  If white letters are on the screen, they seem to look a little yellow but have a blue glow around the edges.

I also tried doing convergence, and blue converge seems to glow.

Posted by Sports Guy on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check a this post:
http://www.fixya.com/support/t366692-philips_50pp920217f_remote_color

it solves the same problem on my PTV

Posted on Mar 11, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The color on my tv is turning green. It's not totally green but it's becoming green. No matter how I adjust the colors it remains the same with too much green. You can't see the true colors...


It is very common for the color of the lamp to change as it nears the end of it's life. Depending on the bulb itself you may see yellow, green, or blue shifts (I have even seen red/orange). This is due to the diminishing output of the bulb and while you can make some adjustment you will eventually hit the point of failure. The bulb could in fact last several more weeks or even months depending on your use and environment. It is probably a good time to start searching for a replacement now so you can replace it as soon as it dies or just replace it now if the color is too bad to be worthwhile.

May 23, 2011 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Big red circle in the middle of the picture


Your light engine is bad and needs replaced. I have a tip at http://www.fixya.com/support/r4251975-replace_dlp_light_engine which explains the problem, how to fix it and where to get the parts. Let me know if you need more help. Thanks for using FixYa and for the great rating.

hardrocko

Apr 30, 2010 | Hitachi 51F59 51" HDTV Projection...

2 Answers

Screen blury,very pink,green edging on picture almost colorless!


This would be a convergence issue you can run the convergence setup that is in your user manual if that does not work you are going to need service.


thanks

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Sep 17, 2009 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Samsung HCM4216W


Probably only one lamop and that would be the blue

Jul 20, 2009 | Samsung HC-P4241W 42" Rear Projection...

1 Answer

Bowed picture and color misalignment


Replace both STKS ICs Ck low ohm resistors 2.7ohms most of the time there will be 2 of them bad.

Jun 11, 2009 | Samsung HCN5527W 55" Rear Projection...

1 Answer

54" Projection TV


Your green gun in our tv is misagligned/out of focus. Your tv uses red, green and blue guns that layer in different shades and mix to create the different colors. Your green is a little off so the colors aren't mixing right which explains the green haze and the shadows. A tv repair man can fix this problem pretty easily and it isnt expenisve.

Aug 28, 2008 | Akai PT4298HD Rear Projection Television

1 Answer

RCA 52" HDTV Rear Projection TV MM52110JX1


Replace FL231 400ma fuse. this will fix your problem.

Oct 26, 2007 | RCA D52W19 52" Rear Projection Television

1 Answer

Yellowing screen off-center - not a convergence issue


You might want to try the optic lens adjustment screw on the side of each crt. Mark them before moving.

May 30, 2007 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

WS-55809 - Video pinched in center, distorted, yellow/blue/red glow


This doesn't sound like a programming issue. I had a very similar problem about 6 months ago and I fixed problem. I had cold solder joint on the video power board. It was the board in the middle. The power supply was to the right. The video board had a driver with a bunch of legs. About 7 solder joint where cold or loose. I solder the board and my mitsu wide screen was fixed. Hope this helps.
Andy

Aug 22, 2006 | Mitsubishi WS-55809 55" Rear Projection...

2 Answers

Round yellow glow


I would have the lamp and ballist checked again, as thats about the only thing I know that has ever caused this complaint. Sorry I couldnt be of more assistance. Good Luck

Jul 02, 2006 | Zenith D52WLCD 52" Rear Projection...

Not finding what you are looking for?
Philips 50PP9202 50" Rear Projection Television Logo

Related Topics:

533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76287 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...