Question about Brother HL-4040CN Laser Printer
I have just purchased a Brother 4050 printer. The color rendition is completely off. Red prints as orange, blue is green, etc. When printing in B/W everything is OK. Duplexing works fine. Color is way off.
I have other color lasers that print from the same computer and color is OK. What am I not doing or setting?
Run a self calibration cycle a couple of times, and also clean the laser scanners.
Posted on Nov 22, 2017
The ink cartridge is either either clogged or running out of ink. Run the software cleaning utility (almost always accessible from the printer) in order to fix a clog. Replace the ink cartridge if the clog cannot be fixed or if the cartridge is almost empty.
Posted on Jul 31, 2007
Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud
Posted on Jan 26, 2009
SOURCE: Bends envelopes in printing
Most laser printers have an "S" paper path. They cannot help bending paper. I would suggest you print lables instead of envelopes if you send several letters. If you only send 1, hand address the envelope. Not elegant ut it works.
Posted on May 29, 2009
Tips for a great answer:
Aug 22, 2012 | Brother DCP 115C All-In-One InkJet Printer
on Jun 20, 2011 | Office Equipment & Supplies
Jan 18, 2010 | Brother HL 1440 Laser Printer
Aug 04, 2009 | Brother HL-4040CN Laser Printer
Dec 13, 2007 | Brother Multi-Function Center MFC-240C...
Apr 18, 2007 | Brother MFC 210C All-In-One InkJet Printer
275 people viewed this question
Usually answered in minutes!