How many ohms is the icbm 782 - Performance Teknique ICBM-782 Car Audio Amplifier

yor subs have dual 6 ohm voice coils from the sound of it-your amp is rated at 650 watts rms at a 1ohm load. The best you can do with the equipment you have is to wire ALL the coils of your subs in parallel and that will give you a 1.5 ohm load for the amp.It should knock the hell outta them with 300 watts on each sub - good luck

it is already "bridged" it's a monoblock amp, 1 channel, if you're trying to get more power, lower your ohm rating..here's a guide to wiring subs for different ohms: http://www.crutchfield.com/S-vXEiF19AwhE/learn/learningcenter/car/subwoofers_wiring.html

EL AMP LO ESTAS FOR SANDO MUCHO I SE CALIENTA POR DENTRO TRERMINAL O FUSIBLES SE QUEMAN

Seems Like Your Cd Player Isnt Putting Out Enough Power

run 12 volt into your rem terminal and see if it comes on if it does your remote wire coming from the headunit is bad or cut

HI DUDE PLS CHECK UR REMOTE WIRE IN UR PLAYER .... U MIGHT BLOW THE FUSE .. ... THE CONNECTION IN REMOTE WIRE WILL POWER EVEN THE FUSE BLOW ..

No, with 1700watts at 1 ohm the max current is 41 amperes, with 1500 at 0.67 the currents is almost 48 ampreres, you will be overdriving the amp at signal peaks.

so that ok wont do no harm my friend

como lo conecto a el estereo de mi casa o a mi dvd

one of the power transistor of your unit shorted check use a tester