Error E-24 copyPrinter - Gestetner - 5309L CopyPrinter Copier

Consult Authorized Service Center or official Helpline of Manufacturer.

Verify the fuses in the supply board and the covers actuator contact.

E - 22 Scanner home position sensor error.Possible causes:
scanner home position sensor failure
scanner motor defective
incorrect scanner ddrive wire position
Remove the exposure glass and verify the wire and the sensor actuator.
Turn DIP switch 101 - 1 ON and press START key to run free the scanner.DIP switch is located on PWB board in rear area,remove the rear cover.

You have to find the door sensors and for testing must manually activate them ALLat the same time to check what is one that has the problem

please check your user manual the proccedure is there

may i know whats the model of your copyprinter?
use an A3 drum.
check if ur using an A3 drum

may i know whats you copyprinter model?
do some force in simolation to pump ink on to the drum so that master will stick to the drum

it is the problem your copier toner or charger. cherger ir dirty clean it then solve your problem
you install your old cartridge then you quary it

Hello sir; Only thing you need to do is change a drum cartridge.

We have had similar ink leaking problems in the past. We found this company- arico1 . We send our type 90 drums there and they refurbished them. They've been real good to us.