Roku remote wont work

Roku How To Roku Remote Stopped Working Easy Solution

The Roku remote needs to re-paired with the Roku Player.
Open the Battery case on the Roku remote (Roku 4 remotes) look for a button and hold for 2 seconds this will then sync it to the Roku player.

I presume you have a box and not a stream stick.Try unplugging ROKU box.Many units have a button you have to push on remote after plugging in ROKU box,this connect Remote to ROKU box.If this doesn't work take out batteries in remote and put back in,this has to be done after you plug in ROKU box.Are batteries weak,try some new ones?

Should be sync on the box itself and remote

open remote and check pcb & rubber pad.

the light can flash but if the Led imitting Diodes is not sending any signal or the LED is not receiving the romote will not work

Hi,

If you have a Wi-Fi Roku remote or a bluetooth Roku Remote, the remote needs to be paired with the unit first before you can control the device. To pair the unit with the remote, you can do the following:

1. Turn off the Roku player for 30 seconds by unplugging the power cord from the power outlet.
2. Once you have the bouncing Roku on your TV screen, open the battery compartment of the remote and press the purple button there once.
3. The Led on the remote should start blinking.
4. Leave the Led blinking and don't press any button on your Roku remote.
5. Wait for the Led to stop blinking.
6. Once the Led stopped blinking, try to test any button and see if it works.