CAR CD CHANGER - ERROR 3

It sounds like you have a disc stuck and it's overriding any commands. I would put the key to acc. Then I would unplug the cd changer from the back of changer and after a min or 2 plug it back in as you hold down on the eject button

before you press the cd on button keep holding the eject button while you press power on, I know this works for computers etc.

There is probably a belt drive involved in the ejection process. If it has stretched and is slipping, the eject will not take place.

Everyone keeps talking about a reset small hole around eject button/ power switch. I have the JBL 6 disc changer. Where is this reset hole on that system? 2002 Camry.

Take it to any local car audio shop, find out the make of the changer and chances are good that it can be fixed quickly and at a minimal cost or replaced with an aftermarket unit that will work perfectly with the factory radio for under 600 installed easily. Hope this helps

I've had this happen before with car stereo's uh i just normally unscrew the screws out of the top of the player to where you can get to the tray or slot for the cds and force the cd tray or the cd itself out but be careful and not break the cd this might work it usually does for me

I sould checkyou phone book to see if there is a bussiness that repairs car radios and cd players.
Other wise you should look into a new cd player at a local electronic store that sells car radios and cd players. The last option is to go to the dealer and order another one.

just replaced my 2006 Pontiac G6 GT Monsoon 6 CD changer with an identical model pulled from a totaled car.How do I reprogram it so it works on my car.

I'm having the same problem. I get an error message for the first cd, but will play ever other cd.

i have a infiniti i-35 2002 and my cd player won't play or eject i was switching cd's on no. 4 and when it went in it got stuck inside it won't play no. 1thru6 are there any suggestions