How to reset yamaha htr-6130 - Yamaha HTR-6130 Receiver

SOURCE: Yamaha HTR-6130 Front right and left speakers with no sound

As simple as this sounds, try hitting the speaker a/b button on the front of the unit, next to the headphone jack. I had the same problem, and was about to package the whole thing back up and go back to Best Buy when I hit this button and then the audio test worked.

SOURCE: cable company remote cannot find Yamaha HTR-6130

this one worked for me...well...sort of, no power, but it got the big one! VOLUME! 0176 and to clarify this is to reply to houseof5girl, this worked on a motorola dvr from cox.

Scott Frye

• 1175 Answers
• Posted on Feb 04, 2009

SOURCE: HTR-6130 will not turn on

Hi

Does the receiver have a switch that allows you to turn off all the speakers?
If so,turn them off and see if the problem stays.

If it still kicks off then , one of the power amp outputs has failed and it will require some fixing

SOURCE: what's NEC PF68S33 TV's remote control code for YAMAHA HTR-6130

I had similar problem when setting up the YAMAHA remote control for my NEC LCD TV. At the end I found I did not follow the YAMAHA manual properly. Did you hold down the DTV/CBL button, and AT THE SAME TIME press the AV POWER for 3+ seconds? You should be able to "REMOTE SETUP OK" displayed in the front panel of the YAMAHA AV receiver. Hope this helps. BTW, only the TV POWER, TV MUTE and the numeric buttons work in my case.

Frank Fulton

• 1114 Answers
• Posted on May 24, 2009

SOURCE: trying to program my Receiver, a Yamaha HTR 6130 to the AUX on my Comcast remote, but neither of the codes they gave me seem to be working.

Do a code search from comcast. If you have the Comcast manual it shows you how to search for codes manually, it can take 15 to 20 minutes for you to do it, however, it should fid your code. The only drawback is that you can only control the volume and power, you won't have input or soundfield control. Hope this helps