Question about Alpine CDA-7894 CD Player

1 Answer

Tyring to adjust the clock

When I try to set the clock, I can only get the hours to flash and then when I set that I can't adjust the minutes.  Should they start to flash after the hour is set??

Posted by Bus driver on

Ad

1 Answer

Timothy D

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 626 Answers

According to the users manual, which is here;

http://vault.alpine-usa.com/products/documents/OM_CDA-7894.PDF

1) In Clock Priority Mode, press and hold the CLK button for at least 3 seconds while the time is displayed. Time indication will blink.

2) Turn the Rotary Encoder to adjust the hours while the time indication is blinking.

3) When the hour has been adjusted, press the Rotary Encoder.

4) Turn the Rotary Encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds anter the minute adjustment. The time can also be manually set by pressing the Rotary Encoder.



Best of Luck.

Posted on Oct 28, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change clock on Pontiac g6


There is 2 different radios. With or without rds. Here are the instructions for both.
Setting the Time for Radios with Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.
To synchronize the time with an FM station broadcasting Radio Data System (RDS) information, press and hold the clock button to enter the clock set mode, then press and hold the clock button for three seconds until UPDATED displays. If the time is not available from the station, NO UPDATE displays.
RDS time is broadcast once a minute. After tuning to an RDS broadcast station, it can take a few minutes for the time to update.
Setting the Time for Radios without Radio Data Systems (RDS) To set the hour, press the clock button. The clock symbol displays and the hour flashes. Turn the ADJ (adjust) knob to increase or to decrease the hours. To set the minutes, press the clock button again. The minutes flash. Turn the ADJ knob to increase or to decrease the minutes. The time can be set with the ignition on or off.

Mar 08, 2015 | Pontiac G6 Cars & Trucks

1 Answer

Teac model LT-1 how to set clock


To set time on TEAC CD Receiver LT1
Press Memory/Clock Adjust button until numbers flash.
First display is 24/12 for choice. Change with >>> button.
Press Memory/Clock Adjust button again and Hours digit
flashes. Set with >>> or <<<.
Press Memory/Clock Adjust button again and Minute digit
flashes. Set with >>> or <<<
In 12 hour mode "PM" will be displayed

Sep 23, 2012 | Teac LT-1 Clock Radio

1 Answer

I dont know how to set the alarm for the studebaker SB2103BW? can you help me?


With the radio turned off-press and hold the clock button until the hour flashes- use the select buttons to move number up or down. Press button to make minutes flash and adjust as above. To set the alarm press the display button until hours start flashing and change with the select buttons. Use the clock button to change from hours to minutes and also from alarm1 to alarm2.

Apr 13, 2011 | Spectra Studebaker SB2103 Clock Radio

2 Answers

I have a used JVC FS-B70 with no remote. How do I set the time on the clock?


To set the clock go to the link below page 9 will tell you how to set clock.


http://resources.jvc.com/Resources/00/00/97/MB002ien.pdf


On the remote control ONLY:

1 Press CLOCK/TIMER.

The hour digits start flashing on the display.

2 Press UP or DOWN to adjust

the hour, then press CLOCK/

TIMER.

The minute digits start flashing.

• When you press and hold UP or

DOWN, the hour digit changes

continuously.

3 Press UP or DOWN to adjust the

minute, then press CLOCK/TIMER.

The built-in clock starts.

• When you unplug the power cord or if a power failure occurs

The clock is reset to "AM 12:00" right away. If this happens, set

the clock again.

• The clock may gain or lose 1 to 2 minutes per month
If this happens, reset the clock.

Mar 02, 2011 | JVC Audio Players & Recorders

1 Answer

HOW DO I SET CLOCK


1 Press STANDBY/ON to turn off the unit, if it is turned on.
The clock flashes on the display window.
2 Press and hold PROGRAM/CLOCK SET for more than 2 seconds.
The hour digits start flashing.
AM
3 Press the CD forward or CD back button (track skip buttons) to adjust the hour, then press PROGRAM/CLOCK SET.
The minute digits start flashing.
PM
4 Press CD forward or CD back button (track skip buttons) to adjust the minutes, then press PROGRAM/CLOCK SET.
I hope this helps.. !
If you need more info have a look here for the manual which is in pdf format:
The clock information is on page 10
JVC RC-EX25 manual
Regards
Mike

Oct 12, 2010 | JVC RC-EX25 Radio/Cassette/CD Boombox

1 Answer

Adjust the time clock on the 2005 xt660x please


G'Day Dutchgbg

Here is a quick guide to set the clock

1: Push the "select" button and the "reset" button together for at least two secounds.

2: When the hour digits start flashing, push the "reset" button to set the hours

3:Push the "select" button to fix the hours, and the minute digits will start flashing.

4: Push the "reset" button to set the minutes

5: Push the "select" button to fix the minutes, and then release it to start the clock.

regards robotek

Apr 09, 2010 | 2005 Yamaha XT 660 X

1 Answer

What buttons change time display


How do I set the clock?
A5
There are several methods to set the clock, depending on the model.

Method 1
Press and hold the BAND and DISPLAY buttons to display the clock
Press and hold the BAND and DISPLAY buttons until the time display flashes
SEARCH left to adjust the hours; right to adjust the minutes
Press BAND button to store the time
Method 2
Same as Method 1, except press DISP to store the time
Method 3
Press ADJ
SEARCH left or right to select clock and press ENT
SEARCH left or right to select the hour or minute
Turn rotary knob clockwise or counter-clockwise to set the correct time
Press enter to store the time
Press ADJ to return to the previous mode
Method 4
Press and hold the BAND and FUNCTION buttons to display the clock
Press and hold the BAND and FUNCTION buttons until the display flashes
Search left to adjust hours; right to adjust minutes
Press BAND button to store the time
Method 5
While the display is showing the clock, press and hold the CLOCK knob until the minutes flash
Press the CLOCK knob to adjust the minutes
When the CLOCK knob is released for 5 seconds, the hours will flash
Press the CLOCK knob to adjust the hours
When the CLOCK knob is released for 5 seconds, the time will be stored
How do I set the clock?
A5
There are several methods to set the clock, depending on the model.

Method 1
Press and hold the BAND and DISPLAY buttons to display the clock
Press and hold the BAND and DISPLAY buttons until the time display flashes
SEARCH left to adjust the hours; right to adjust the minutes
Press BAND button to store the time
Method 2
Same as Method 1, except press DISP to store the time
Method 3
Press ADJ
SEARCH left or right to select clock and press ENT
SEARCH left or right to select the hour or minute
Turn rotary knob clockwise or counter-clockwise to set the correct time
Press enter to store the time
Press ADJ to return to the previous mode
Method 4
Press and hold the BAND and FUNCTION buttons to display the clock
Press and hold the BAND and FUNCTION buttons until the display flashes
Search left to adjust hours; right to adjust minutes
Press BAND button to store the time
Method 5
While the display is showing the clock, press and hold the CLOCK knob until the minutes flash
Press the CLOCK knob to adjust the minutes
When the CLOCK knob is released for 5 seconds, the hours will flash
Press the CLOCK knob to adjust the hours
When the CLOCK knob is released for 5 seconds, the time will be stored
How do I set the clock?
A5
There are several methods to set the clock, depending on the model.

Method 1
Press and hold the BAND and DISPLAY buttons to display the clock
Press and hold the BAND and DISPLAY buttons until the time display flashes
SEARCH left to adjust the hours; right to adjust the minutes
Press BAND button to store the time
Method 2
Same as Method 1, except press DISP to store the time
Method 3
Press ADJ
SEARCH left or right to select clock and press ENT
SEARCH left or right to select the hour or minute
Turn rotary knob clockwise or counter-clockwise to set the correct time
Press enter to store the time
Press ADJ to return to the previous mode
Method 4
Press and hold the BAND and FUNCTION buttons to display the clock
Press and hold the BAND and FUNCTION buttons until the display flashes
Search left to adjust hours; right to adjust minutes
Press BAND button to store the time
Method 5
While the display is showing the clock, press and hold the CLOCK knob until the minutes flash
Press the CLOCK knob to adjust the minutes
When the CLOCK knob is released for 5 seconds, the hours will flash
Press the CLOCK knob to adjust the hours
When the CLOCK knob is released for 5 seconds, the time will be stored
How do I set the clock?
A5
There are several methods to set the clock, depending on the model.

Method 1
Press and hold the BAND and DISPLAY buttons to display the clock
Press and hold the BAND and DISPLAY buttons until the time display flashes
SEARCH left to adjust the hours; right to adjust the minutes
Press BAND button to store the time
Method 2
Same as Method 1, except press DISP to store the time
Method 3
Press ADJ
SEARCH left or right to select clock and press ENT
SEARCH left or right to select the hour or minute
Turn rotary knob clockwise or counter-clockwise to set the correct time
Press enter to store the time
Press ADJ to return to the previous mode
Method 4
Press and hold the BAND and FUNCTION buttons to display the clock
Press and hold the BAND and FUNCTION buttons until the display flashes
Search left to adjust hours; right to adjust minutes
Press BAND button to store the time
Method 5
While the display is showing the clock, press and hold the CLOCK knob until the minutes flash
Press the CLOCK knob to adjust the minutes
When the CLOCK knob is released for 5 seconds, the hours will flash
Press the CLOCK knob to adjust the hours
When the CLOCK knob is released for 5 seconds, the time will be stored
How do I set the clock?
A5
There are several methods to set the clock, depending on the model.

Method 1
Press and hold the BAND and DISPLAY buttons to display the clock
Press and hold the BAND and DISPLAY buttons until the time display flashes
SEARCH left to adjust the hours; right to adjust the minutes
Press BAND button to store the time
Method 2
Same as Method 1, except press DISP to store the time
Method 3
Press ADJ
SEARCH left or right to select clock and press ENT
SEARCH left or right to select the hour or minute
Turn rotary knob clockwise or counter-clockwise to set the correct time
Press enter to store the time
Press ADJ to return to the previous mode
Method 4
Press and hold the BAND and FUNCTION buttons to display the clock
Press and hold the BAND and FUNCTION buttons until the display flashes
Search left to adjust hours; right to adjust minutes
Press BAND button to store the time
Method 5
While the display is showing the clock, press and hold the CLOCK knob until the minutes flash
Press the CLOCK knob to adjust the minutes
When the CLOCK knob is released for 5 seconds, the hours will flash
Press the CLOCK knob to adjust the hours
When the CLOCK knob is released for 5 seconds, the time will be stored
go to this web site for any thing about ur stereo
http://www.clarion.com/us/en/support/faq/Audio/index.html

Feb 18, 2010 | Clarion Car Audio & Video

3 Answers

How do you set the clock on sony xplod 100db+?


The clock uses a 12-hour digital indication...... Press and hold the select button...... The setup display appears...... Press the select button repeatedly until “CLOCK-ADJ” appears...... Press (DSPL...... The hour indication flashes...... Rotate the volume control dial to set the hour and minute...... To move the digital indication, press (DSPL...... Press the select button...... The setup is complete and the clock starts......

Jan 28, 2010 | Car Audio & Video

2 Answers

Setting the clock


You need to hold down both the reset and the select buttons until the clock starts flashing. Then push the select button to adjust the hour. Then push the reset button to make the minutes start flashing, push the select button to adjust the minutes. Once you have the time set correctly, push the reset button one more time. You should be done.

Jan 10, 2009 | 2007 Yamaha Royal Star Tour Deluxe

1 Answer

Help


  1. press and hold the "clock" button. The time should start flashing.
  2. Adjust the hour by using the square silver buttons for "skip backward" or "skip forward" on the CD controls.
  3. Press the "clock" button again so that the minutes are now flashing.
  4. Adjust the minutes with the same buttons used to adjust the hour.
  5. Press the "Prog Set" button to conclude the process.

Oct 27, 2008 | RCA RS2620 Single Cassette Deck

Not finding what you are looking for?
Alpine CDA-7894 CD Player Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio & Video Experts

Robert Salgado
Robert Salgado

Level 2 Expert

200 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...