Question about Computers & Internet

3 Answers

Lost Password on a US Robotics Router

It is the admin password.. Any hope of resurrecting this device?

Thanks,
SC

Posted by CanuckDude on

  • 3 more comments 
  • Dottiegirl May 16, 2008

    I do not know the administrator password and I have no idea how to reset it, dismiss it, or bypass it. I need help - please! :(



    I've tried every password that I've ever known to have. I've tried to restart the laptop in safe mode - with still no luck. I've tried taking the system back to an earlier time and still no luck.



    HELP!!!!!!!!!!

  • martha31al Jul 20, 2008

    Yes I have the same prolem.

  • flee1021 Oct 06, 2008

    I have a Ativa wireless router hooked to my desktop computer. The router was setup where no one could use my router except me. I recently bought a laptop and i am not able to use the internet. I lost my password and do not remember my username. How can i get that information?

  • peterscott66 Dec 15, 2008

    i have the same problem, the password is wrong?

  • ruchikajp Jan 20, 2009

    how can i reset my router? since i forgot my password & user name?

×

Ad

3 Answers

Anonymous

How do i set up my pasword

Posted on Dec 13, 2007

Ad

Anonymous

There is a link inside the case, google the manual and it will give you instructions .

Posted on Nov 15, 2007

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 57 Answers

Some router has its reset button switch.. try to locate it

Posted on Nov 14, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i change my wireless password.u. s robotics modem?


You can change password with below method.Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

May 15, 2011 | U.S. Robotics MAXg USR5461 (738168036790)...

4 Answers

Forgot the password i tried so many times but incorrect allthe times


You will want to try
username: admin
password: admin

username: admin
password: 1234

username: admin
password: password

If these dont work you will want to reset the router back to defaults.

Mar 01, 2011 | NetGear WGR614 Wireless Router

1 Answer

I lost ma admin password and i wouldn't want reset my router. Is there a solution ?


If you cannot log into your router:Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

or

if there is a small hole in the front or back of the router push a hair pin in to reset to factory settings

also if its linked directly to your internet contract you could ring your ISP internet service provider and get the password from them hope this helps

Feb 07, 2011 | Trendware TEW-452BRP Wireless Router...

2 Answers

What is the default ip and user name, password for this model ????


The "IP address" is your DEFAULT GATEWAY so you can try 192.168.1.1 or you have to check it by going to START>RUN and type CMD in the box and then Enter (brings you to the COMMAND PROMPT type IPCONFIG and enter you will see your DEFAULT GATEWAY.
For the user name and password (you didnt mention the model #) so for all US ROBOTICS the User names are (unless you changed it) try "root" "Any" "support" "Admin" and Passwords are (unless you changed it) "12345" " Admin" "support" "password". If you did change it and cant remember you can always press the reset button on the back and restore it to the "Out-Of-The-Box" settings.


If this was helpful, please indicate so, if not -comment back so we can dig further to resolve this.

Jan 06, 2011 | U.S. Robotics (USR5450) 802.11g/b Wireless...

1 Answer

I ahve forgotten my forgotten netgear password on WGR614 router. Please advise Thanks Tony


Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

or

if there a small hole in the front or back of the router push a hair pin in to reset to factory settings

hope this helps

Dec 14, 2010 | NetGear WGR614 Router

1 Answer

Lost my password to the router. how do i reset?


DX-E402 username is admin & password - password

Sep 27, 2010 | U.S. Robotics (USR8054) Router

1 Answer

How do i make my connection private


You can set WEP security in router so only those can connect who know the WEP password. You can set WEP password in router with below method. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router.Then click on wireless->wireless security then enable WEP security enter password it is your password to connect wifi then save settings and restart router then you can connect with that password .. Let me know if you need further assistance. Thanks for using FixYa

Sep 05, 2010 | U.S. Robotics (USR8054) Router

1 Answer

Had to reset router to factory settings now want to reset pasword


If you have your router at default settings do the following.
Open a web browser and type 192.168.1.1 into the address bar. This should pull up the settings for the router.
The username is likely "admin" or "administrator" and the password "admin", "administrator" or "password". Once you're into the router you can change the settings as you wish.

Jan 27, 2010 | U.S. Robotics MAXg USR5461 (738168036790)...

1 Answer

Forgotten password for D-Link DSL G604T wireless router


These are the default settings:

When the login window appears, set the user name to Admin and leave the password box empty. If this doesn't work, you may also try admin for both username and password (all small letters).

If the default doesn't work, you may reset the password by pressing the reset button for 30 seconds. This will bring the router to factory default settings (including all the configurations set on the router).

Hope this helps.

Jun 25, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

2 Answers

Forgot passwrd on a us robotics router


Generally you have to push and hold the reset button, i suggest for 30 seconds, this should completely reset the unit, including passwords and settings.

Jan 29, 2008 | U.S. Robotics USRobotics USR5461 Wireless...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85231 Answers

Brad Brown

Level 3 Expert

18204 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...