How do i set the time on an Invicta Lupah mens watch with three subdials

Take it into a local jeweler for repair and service. It is a nice watch, $1,500 new and worth fixing professionally.

https://www.invictawatch.com/watches/detail/1092-invicta-lupah-men-48mm-stainless-steel-stainless-steel-white-dial-3600k-mechanical

Personally, I would return it to the Invicta Service Centre in case it needs parts. It will also come back with a warranty on the repair.

https://www.invictawatch.com/watch-service

..

View the instruction manuals - Invicta

invictawatch.com/service/view-the-instruction-manuals

Enter your 4 or 5 digit model number to locate your watch. RECEIVE THE NEWSLETTER SOCIAL MEDIA · Terms & Conditions Customer Service Service ...Missing: 12983 ‎subdial

Setting Time Date Invicta Watch Chronograph - SmartBargains

https://www.smartbargains.com/.../Setting-Invicta-Chronograph.html

Know how to set time, day, and date in the Invicta Watch Chronograph. ... Invicta sells several different kinds of chronograph watches, with the two main ... and the Invicta Big Date and Day chronograph - the subdials that measure seconds and ...Missing: 12983

Invicta Reserve 48mm Octane Swiss Made Quartz ...

try this link
http://www.invictawatch.com/support_files/instruction_manual/Manual-HiRes.pdfhttp://www.invictawatch.com/support_files/instruction_manual/Manual-HiRes.pdf

i have a link. i need to replace the bezel, any help

Yes that's common, most chronograph watch's a small subdial is the times second hand. The large second hand is only for the timing function of the chronograph.

If your lupah has a screwdown crown (middle button), you need to unscrew it. Pull out the middle button 1 click (it should have 2 clicks...if it's all the way pulled out, then you have gone too far) and turn the screw counter clockwise. Some model's you have to give them a couple good turns to adjust a single day, so don't give up if you move it a quarter turn and nothing moves. Once done adjusting, just push the crown back in and lock it down (lock down crown isn't a necessity. It is rather a means of keeping water at pressure from entering your time piece. So don't freak out if your model doesn't have a screwdown crown. Not all of them do). Best of luck to you!

Go to http://www.invictawatch.com/new/product/search.php?CAT_REF_NBR=7&prn=2095#2095 (this should be part of the "collections".

Click on the tab maked "manual" and you should find the information you need.

I don't have this model, but normally, invicta dates are set by pulling the crown out half-way and turning counter-clockwise.

Your watch is fitted with chronograph movement 5040D made by Ronda (Switzerland). If you take a closer look, then you will realise that the subdial at 3 o'clock is counting seconds allready. This is your seconds dial, not the big one.
The big seconds hand actually is the chronograph hand (stopwatch) and, when activated, works together with 1/10th counter.
Follow this link and see for yourself:

http://www.ronda.ch/e/index_bedienung.html

Find movement 5040D and click on INTERACTIVE version.

Rate me, please.