- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fusing Reload Temperature Error (Fatal Error)
After servicing the machine to solve the problem, the service technician must execute a "Fuser SC Reset". Otherwise, the machine will continue to issue this SC code and cannot be operated.
There is a problem with the fuser section p/n M1014002 -Carl
IF THI IS A SP200
The output of the charge corona wire of the black PCU is abnormal.
• CGB power pack connection loose, broken defective
• Check CGB power pack connection to BCU
• CGB power pack defective
• BCU defective
• Replace OPC drum
More likely needs a new Charge assy. or Charge grid. Roughly $20-$100 for part(s).
Fusing thermistor deformed or out of position ? Fusing lamp harness loose, broken, defective ? Fusing unit defective ? After servicing the machine to solve the problem, the service technician must execute a "Fuser SC Reset". Otherwise, the machine will continue to issue this SC code and cannot be operated.- Carl
SC411: Separation bias error -Definition- [B]A separation bias leak signal is detected.- Possible causes -· High voltage supply board defective· Poor connection of the PCU· Discharge brush defectiveYou need the service manual or have a technician fix it.If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe