SOURCE: HOW DO I RESET THE FUSER ON AN OKI C710
Check online for a fuser kit for your machine, OKI machines use a fuse installed on the new fusers that reset the count and then burn out. The fuse is Littlefuse #251-062
SOURCE: Hi, recently bought an Oki c710 printer (not the
Try this:
While printer is off, hold down plus "+" and minus "-" keys then power printer on and continue to hold the + and - keys until "System Maintenance" appears on the display (you will see "please wait", "initializing", "ram check" before it appears).
When System Maintenance appears press Enter. You will be prompted for a password. The default password is "000000" (six zeroes). [Use the minus key for quicker access to the zeroes and press enter twice after the last zero to enter the menu.]
SOURCE: I have a OKI C6150 got a jam now I have a Fatal #980
Inside fixing unit are also thermoswitch and thermistor wich can burn out, but also the fixing lamp too. You must dissasemble it and by DVM test the circuits, if the circuit is opend on thermistor, that means that he is burnd out.
SOURCE: how do i reset the drum unit on my oki c710?
When the image drum cartridge reaches the 90% point of its life cycle on an Oki Data laser printer, a "Change Drum" message will display on the screen. Around this time the print typically starts to become faint or starts to deteriorate. When a new drum cartridge is installed, the drum cartridge counter needs to be reset for the printer to keep track of the life cycle of the replacement.
1.Turn the printer power off. Open the top cover.
2.Press the oval switch on the operator panel. Hold the switch down. Turn the printer power on.
3.Release the oval switch when the lights on the front panel flash twice. This indicates that the drum counter has been reset. Close the printer top cover.
1,152 views
Usually answered in minutes!
×