Question about Mercury KVM266PM-U (KVM266PMUD1600) Motherboard
Mercury KVM266PM-U V3.0 motherboard may have suffered when our power supply died in a flash of light. (but no smell) After replacing the power supply and seeing that the computer displays the Mercury bios splash page, I've tried running this motherboard with various combinations of hard disks (that are working) on both secondary and primary IDEs. Whether or not I have anything connected to the secondary IDE and in all combinations possible, I get the following message during bootup: Secondary master disk ATAPI incompatible.
Does this mean the motherboard is kaput?
Are you german tink so
i think you can not go to windos. then *********** board bios might be at wrong way
(this is not the case in 99% i say)
try bios cnfiger .
in this msasage you gat onley about ide secendary then ide primary mightr be working try set ahard to it and set the bios primery boot driver it
this dosent work neer the cmos tou well see a jumper known as cmos_JP,cmos_J put the jumper to the other way and torn on torn off put it back it where restart
this might work if not
Most dafaneetly you mather board is Kaput
Posted on Jun 22, 2009
Tips for a great answer:
Feb 20, 2011 | Mercury KVM266PM-U (KVM266PMUD1600)...
Apr 24, 2009 | Mercury KVM266PM-U (KVM266PMUD1600)...
Dec 20, 2008 | Mercury KVM266PM-U (KVM266PMUD1600)...
Aug 22, 2008 | Mercury KVM266PM-U (KVM266PMUD1600)...
Aug 10, 2008 | Mercury KVM266PM-U (KVM266PMUD1600)...
125 people viewed this question
Usually answered in minutes!