SOURCE: ca i recharge catridge form cnon pixma MX 330?, i
All catridges are made to show the ink levels only for 1st use, once you refill the cartridge you need to reset the ink level chip, some cartrides level cannot be reset, some can be re-set.
There are solution available for some specific printer ink cartridges on how to re-set the ink level.
You can google and loacte the solution giving cartridge number in the search field of google.
SOURCE: I cant reset the canon mx-310 from u051 code.The
his will clear your printer from displaying common printer errors like
U053,
U051 and U052. The importance of the "reset the cartridge"
procedure is to avoid the printer from detecting your cartridge as
reused one. The steps below is recommended to do after refilling an ink cartridge.
1. Turn off your printer
2. Press and hold the
STOP/RESET button
3. Press and hold Power ON button
4. While
holding the Power ON button, release the STOP/RESET button
5. While
holding still the Power ON button, press twice the STOP/RESET button
6.
Release the Power ON button
7. Wait until it display an "idle"
message. It will take about a minute.
8. When "idle" appear, open
the top cover to expose the cartridges.
9. Lift up the cover for
cartridge holder and take out both the black and color cartridges
10.
Return the cover of cartridge holder and turn off the printer
11.
Return the top cover and turn on the printer again
12. After the
printer initialize, return the cartridges.
What happened when ink ran out from a
refilled cartridge and the printer detected it?
The printer
will display an error
U162 or U163. All functions of the all-in-one printer will stop and
your printer will not work. The next thing you will know is you are in
the front of a computer shop and buy a genuine canon cartridge.
But
wait, there is still a way to fix this. Reset it again using a different
procedure. Reset the detections of reusable cartridge.
1. Turn off
your printer an turn it on again
2. After the printer initialize
try to copy or print. The error will appear.
3. When the error is
displayed on the display panel of the printer, Press and Hold the
STOP/RESET button and wait until it self restart.
4. Release the
STOP/RESET button the the printer is restarting.
5. Wait for a few
seconds and the pending print jobs will commence.
Let me know if this works with you
Please rate this solution. Thank You!!
SOURCE: in canon printer mx 330
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts.
SOURCE: CANON PIXMA MX 328 EROR
Ink cartridge not installed, or not properly installed. Install the ink cartridge properly. If the error is not cleared, the ink cartridge may be defective. Replace the ink cartridge.
SOURCE: error U051 de canon mx300
I think you need to reinstall printer driver again, Be sure unistall by REVO then reistall the drivers again.
Download the printer drivers from this link Pixma MX300 Driver download
http://printer-driver-download.us/canon-pixma-mx-300-driver-download/
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts.
394 views
Usually answered in minutes!
×