ROUTER PROBS WITH MY BELKIN

hi mate, i would just hard reset the router and then you can use the default password that comes with it , below is the link to the belkin hard reset proceed, and i diagram of your router, just hold a paperclip in the reset button for 15 seconds (fig. 10) after its reset you can use the default password the router came with,
here is the hard reset procedure
Resetting the Belkin router to factory default settings using the Reset...

the default password should be on the router on a sticker somewhere

Hi Nenia, could please give us the model number of the wireless router again from Belkin.
Second , are you trying to connect to the wireless router, using a wire or using the wirless only.



Thanks
Proton

You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.15.1
or
http://192.168.2.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Clickon wireless settings enable wireless then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

Use the reset button of the router, to change the password into factory settings.

Here's the manual for your Belkin router.

http://cache-www.belkin.com/support/dl/p75170-d_f5d8231-4_man.pdf

The reset button can be found on Page 13 of the User Guide Manual, this is the instruction on how to reset your router.

There is no password by default.

Note: Using the reset button will delete all the settings of your router that entered by a user, be sure to put back all the settings according to your internet provider setup connection.

if you have not changed any settings from belkin router, access the wireless configuration on your windows machine and search for the belkin ssid then hit on connect

I have a Mac Pro and a Belkin F5D 7230-4 Router. The Mac links to the WiFi but will not go on to the internet. The Router works fine with a wired PC and other wireless PCs. I have updated the Belkin with the latest Firmware but it does not help. I have tried powering down the Router and Modem

Gmac

try going to http://192.168.1.1 default user name and password is admin for both. go to your wireless security and set up security as xbox allows. i think i set mine up with wpa and all i had to do was put the code into the xbox settings after the router page generated an encrypted key sequence.

I HV COMCAST AND THE BELKIN ROUTER AND I WANTED TO NO HOW CAN I CONNECT MY PS3 TO THE ROUTER.