SOURCE: No picture in LCD
The most common problem I see in this camera is the LCD harness itself. A crease forms in the cable and opens the B+ line going to the backilght assembly. I would also check the chemical fuses located on the DC input board to see if any are open due to a shorted inverter in the LCD module. The open fuse will show low ohms to ground if the inverter is shorted. Good Luck my friend! Joe Weibel customelectronics.org
SOURCE: MY Hvx 200 Is totally Black when I turn it on. the
You should go into the menu, camera settings and set the evf to on. EVF stands for electronic view finder. This can be set to be on when the lcd is open or closed. CAreful, if the evf is set to on and you point the viewfinder towards the sun, it will burn white marks into the viewfinder and ruin it.
66 views
Usually answered in minutes!
×