Question about Necchi 6015 Mechanical Sewing Machine

1 Answer

Machine wont sew

Material immediatly gets stuck in stitchplate

Posted by Joey38 on

  • kmhopper Feb 07, 2009

    The material and thread jam at the bobbin plate. I have rethreaded the bobbin, Clean the bobbin casing and reassembled and the bobbin still jams. I must be doing something just a little off as I have not sewn in a few years with the machine and can't remember the nuance - I can't find the manual but I am willing to download one in English is available.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You may need to get a scrap piece of material to lead off with or hold on to your thread and gently pull it to start your material.

Posted on Aug 09, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lervia sewng machine. material wont feed through. Dogs are up but material just wont move through. needle moving freely.


Hm, could be several things. If stitches are not being formed, it could be a timing issue (the needle does not arrive at the bobbin at the correct time). Did the machine recently hit a pin or something hard? That will knock a machine out of time. There could also be a broken piece stuck that is preventing the feed dogs from operating. Thoroughly clean the machine around the bobbin area and feed dogs.

...

Jul 28, 2016 | Sewing Machines

1 Answer

My sewing machine will not stich. i have tryed everything i can find on this problem but nothings working


Make sure nothing has either gotten stuck/caught/jammed somewhere inside it. Insure that the thread stays attached to the needle. Or the material you are trying to sew/stitch may be too thick.

Nov 17, 2012 | Singer Sewing Machines

2 Answers

Singer 507 sewing machine - material wont feed through


if the fabric won't feed thru then there is something wrong with the feed dogs

May 25, 2012 | Singer Sewing Machines

1 Answer

The material wont go through you have to pull it rather than the machine feeding it the sewing machine is a singer inspiration 4205


Maybe you should check your feed dog it may be down instead of up to walk the material thru...

Jan 17, 2011 | Sewing Machines

1 Answer

Thread keeps breaking


It sounds like you the thread is passing a place with a burr, it could be in the needle (replace needle) or on the stitchplate (maybe a bent needle hit the stitch plate and put a knick in it, a sewing repair man can sand it out). Or you don't have the tension right. Or you may have cheap thread that is not strong enough. I hope some of these suggestions are helpful.

Dec 23, 2010 | Baby Lock Imagine

1 Answer

Needle stuck in the material while sewing a straight stitch.


See if you can release the bobbin from the case.

Dec 30, 2009 | PfaFF Sewing Machines

1 Answer

Backward stitching


Knowing which kind of machine you have helps alot. Just guessing but maybe the reverse mechanism is stuck and needs some oil in it to free it up. Or the buttonhole mechanism is stuck in reverse part of it.
Probably you should have it looked at.

Dec 31, 2008 | Singer 3116 Simple

Not finding what you are looking for?
Necchi 6015 Mechanical Sewing Machine Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Necchi Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Brad Brown

Level 3 Expert

18196 Answers

Are you a Necchi Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...