Question about ATI RADEON X1650 Graphic Card
Posted by Anonymous on
SOURCE: ATI X1650 Pro, AGP
i had a simer problem if it is connected with the HD compisit cable
you need to go in to the catalyst control center under advance view you have display options were it will list the 2 diplays and have a third display in a gray box under it
right click on the third display and go to swap that should resolve the issue
Posted on Jun 03, 2008
SOURCE: ATI RADEON X1650 Pro Problem
The graphics card might not be working in sync with your processor. Get it checked WHY this is happening. Probably a faulty connection somewhere. See if you can find one before getting it checked.
Posted on Sep 15, 2008
You need two pci-e slots. Put the cards in the slots. The cards connect with a crossfire bridge. Then just plug your monitor in and your ready to go. Make sure that you have the software installed and that your chipset supports crossfire. For more info click here.
Posted on Nov 19, 2008
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: