SOURCE: Canon NP-6035 persistent E002
There is a heating problem connected to the fuser. It could be the heater lamp or thermal switches. Lamp is most likely.
SOURCE: error code e002 on canon copier np6050
Also this code needs to be cleared in service mode. Despite what the display says, turning it off and on will not reset it. To enter service mode insert a straightened paper clip into the small hole in the front cover, near the meters, a "$" sign will appear on the display. Press * 4 * in order. Press ">>" to select "error" then press "OK" then power cycle.
(I cant remember on that model but you may need to defeat the interlock on the front door in order to enter service mode.)
SOURCE: i have an error in my machine canon np 6050 error
"E004"
Abnormal fuser temp. (fixing heater, dc controller, ac driver)
http://rapidshare.com/files/161024133/NP6050sm.rar
That link above is for a service manual. Copy/Paste that address to address bar..
54 views
Usually answered in minutes!
×