Question about Plantronics Explorer 320 Wireless Headset
My headphones were paired to my iphone 4, but now they no lomger connect. The iphone just searches for a device but doesn't connect
Posted by Anonymous on
I had lots of trouble too. I thought it was my phone. Well here's what you do. First off remove the device completely from your phone. Turn off the phone and take the battery off so it can re-boot. When the phone is powered back up put your bluetooth in pairing mode and get it back on your phone. It should connect without any problems. Now....here is the trick. When you want to disconnect the device(bluetooth) from your phone don't turn it off on your phone. Shut the actual power off on your bluetooth. The phone will recognize this and disconnect the device. The only thing left on your phone will be the bluetooth icon. Being the icon still on your phone it is still in discovery mode and can overtime use up your battery life searching for a device. This is when you can go to your phone and turn off the bluetooth. On your NV 2 go to your bluetooth menu and just use your left softkeyto turn it off. Now there is no connection whatsoever. And to turn it back on do the opposite. Go to your bluetooth menu and turn on your bluetooth. You will see the bluetooth icon. Now you power up the bluetooth and it will connect as soon as it get the signal. This took me 2 weeks of trial and error and other stuff but I am happy now and I hope this solves any bluetooth problems...
Posted on Jun 06, 2009
The solution for paring the explorer 240 is found in the bottom of the product page for the embedded link on the User Guide Link. I have also provided the instructions below. I hope this helps
How to Pair Your Phone With Your Headset for the First Time
1 Turn on the Bluetooth feature on your phone.
For most phones, select Settings/Tools > Connections >
Bluetooth > On. See your phone’s user guide for more information.
2 Turn the headset on.
Turn on your headset by sliding the Power Switch toward the microphone. Wait until the indicator light flashes red then blue.
If you don’t see the red then blue flashes, turn the headset off, then turn it on again. Press and hold the Call Control button until you see the red then blue flashes that indicate pairing mode status.
3 Set your Bluetooth phone to ‘discover’ to locate the headset.
This usually involves going to ‘setup’, ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add a device’.
4 Once available headsets are listed, select your headset (for example 2XXPlantronics or 3XXPlantronics). If prompted for a passkey, enter 0000.
When pairing is successful, the indicator on your headset flashes blue. Your phone will also confirm when pairing is complete.
Posted on May 07, 2010
SOURCE: my iphone 4 finds my
You must put your headset in pairing mode first. Press and hold the call control button for some 6 seconds, until the indicator light flashes alternately in red and blue, thus indicating the headset is in pairing mode. Only then, make your phone's blueooth application search for new devices. After a while, it should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros). If the pairing process is successful, the indicator light will flash in blue.
By the way, if its user guide happens to be missing, feel free to download it from this location.
Hope you are able to sort your problems out soon.
Posted on Nov 07, 2010
SOURCE: Trying to connect Plantronic 220
1.First switch on the bluetooth in mobile phone.Keep the headset switched off.
2.Now press the call button for 2 seconds if you are paring this headset for first time,If this head set is aired already with another mobile press for 8 seconds until the headset status indicator begins to flash blue then red
3.Now search the bluetooth by your mobile device.It detects and you can pair it
Posted on Nov 10, 2010
SOURCE: My iPhone 4 bluetooth won't
On your phone, make sure bluetooth is turned on (settings, general).
While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode ***(usually you have to hold the power button for 7-10 seconds)***
Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.
Posted on Jan 04, 2011
Tips for a great answer:
Dec 05, 2016 | Radio Communications
Oct 17, 2016 | Insignia Bluetooth Wireless Headphones...
Mar 09, 2016 | Yurbuds Liberty Bluetooth Headphones Black
Jan 22, 2015 | Audio Players & Recorders
Dec 21, 2013 | Computers & Internet
Nov 20, 2013 | Radio Communications
Jul 26, 2011 | Plantronics Backbeat 903 Bluetooth...
Aug 19, 2009 | TDK Audio Players & Recorders
May 12, 2009 | Audio Players & Recorders
Usually answered in minutes!
Step 2: Please assign your manual to a product: