Question about Konica Minolta Minolta MagiColor 2210 Laser Printer Toner Cartridges
How to reset the imaging unite of Konica Minolta MagiColor 2210?
Posted by Anonymous on
When you replace the image unit for what ever color is the machine asking for
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
Posted on Jan 22, 2016
SOURCE: Konica Minolta magicolor 2430DL
Open the top cover. Remove the drum (part with long green handle). Below the drum you will see a strip of glass about 4-5 inches long. Take a cloth and wipe across the glass.
This will normally clear up any white lines in your print.
Posted on Jul 19, 2008
Did you buy a whole new drum unit, or just change the cartridge? If so, the fuse may still be blown. Also, you may need to empty the spent toner out of the old cartridge.
Posted on Nov 18, 2008
On the end of the image unit you will find a white bit of plastic with a small screw in the middle, make sure this screw is tight and then reinstall the units(give the units a bit of a shake too)
Posted on Apr 06, 2009
On your transfer unit there is a .80 amp fuse you can replace. this will reset your belt. make sure you use .80 amp or it will not work. on your fuser there is an inline 1/16 amp fuse next to the plug you can replace for that.
Posted on Oct 01, 2009
Tips for a great answer:
Apr 18, 2014 | Konica Minolta magicolor 2300DL Laser...
Apr 06, 2014 | Konica Minolta magicolor 4650DN Laser...
Feb 17, 2014 | Konica Minolta magicolor 1690MF All-In-One...
Feb 05, 2013 | Konica Minolta magicolor 4750EN Laser...
May 15, 2012 | Konica Minolta magicolor 1690MF All-In-One...
Jan 04, 2011 | Konica Minolta OEM Konica Minolta...
Dec 11, 2010 | Minolta magicolor 2200 DeskLaser Printer
Apr 29, 2009 | Konica Minolta magicolor 2400 Laser...
Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...
159 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 1 Expert
Level 2 Expert
Step 2: Please assign your manual to a product: