Question about HP ProLiant ML110 Server
Posted by Anonymous on
Are you attempting to boot from the Windows CD?
If you are booting the server from a Windows installation disk and it is unable to detect the hard drive, this typically means the following things.
You need to provide the driver for the RAID controller of the server (this can vary, depending on the version of the ML370 e.g. G4/G5)
If it still cannot detect the hard drive after providing the driver for the RAID controller or if there is not a driver available for NT4, it may not support the controller.
In this case you can remove the RAID set by entering the RAID setup (could be LSI or adaptec). NOTE THIS WILL DESTROY ALL DATA ON THE DISKS THAT ARE A PART OF THIS RAID SET.
Posted on Dec 28, 2008
I m really sorry to say that but you have a Server Product and its built to run Windows Server Series on it (or Linux / Novell Netware).
This is the list of compatible Server list
Microsoft Windows Server 2003 Microsoft Windows Server 2003 for 64-bit Extended Systems Microsoft Windows Server 2008 Essential Business Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 Small Business Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 x64 Novell NetWare 6.5 Red Hat Enterprise Linux 4 (AMD64/EM64T) Red Hat Enterprise Linux 4 (x86) Red Hat Enterprise Linux 5 Server (x86) Red Hat Enterprise Linux 5 Server (x86-64) SUSE Linux Enterprise Server 10 (AMD64/EM64T) SUSE Linux Enterprise Server 10 (x86) SUSE Linux Enterprise Server 9 (AMD64/EM64T) SUSE Linux Enterprise Server 9 (x86)
Here is the link for Drivers
Try to use the Driver for Windows 2003.
It has a Matrox VGA as I know. If you know which Matrox series you have, then Browse here for the Drives: Matrox Graphics Support. Make sure that you choose the Exact Driver software which suites the System.
Note: Not every product has the Driver Software for Windows XP.
Please rate the answer! Thanks for contacting Fixya!
Posted on Jun 23, 2010
SOURCE: lan driver hp proliant ml 110
you find all hp drivers here for your server. http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=uk&cc=uk&h_page=hpcom&lang=en&h_client=S-A-R135-1&h_pagetype=s-002&h_query=ProLiant+ML110+Server&submit.x=11&submit.y=8
Posted on Oct 07, 2010
1) disconnect hdd and check
2) update BIOS from http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3984626&taskId=135&prodTypeId=15351&prodSeriesId=3984625&lang=en&cc=us
not solved then change powersupply.
Posted on Nov 28, 2011
Tips for a great answer:
Jul 20, 2012 | HP ProLiant ML110 Server
Apr 13, 2011 | HP Compaq ProLiant ML530 Server
Nov 29, 2010 | HP ProLiant ML110 Server
Oct 07, 2010 | HP ProLiant ML110 Server
Jun 28, 2010 | IBM xSeries 226 Server
May 22, 2010 | HP ProLiant ML110 Server
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: