Hoover AAA140 Front Load Washer Logo

Related Topics:

Question about Hoover AAA140 Front Load Washer

1 Answer

How do I empty filter.

I have mislaid my manual and I urgently need to empty/drain filter. Many thanks.

Posted by jen3216 on

Add Your Answer

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Hot-Shot:

    An expert who has answered 20 questions.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

Take off plastic trim at front off machine then unscrew filter

Posted on Jun 09, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Russel Hobbs Dual slow cooker 10951 I need the instructions to to start up urgently. I seem to have mislaid my manual.
Hello you can find your manual on this link http://www.russellhobbs.co.uk/pdf/product_143_10951.pdf
if for some reason the link does not work please message me back and I will contact and send you the manual through email. Please also remember when our chat has concluded to rate how this service has helped in locating your manual for you.
Thank you again,
Rick
Read full answer
Feb 13, 2012 • Refrigerators
0helpful
1answer

Machine had been giving E20 error code - filter cleared and it re-started ok. When wash was in progress - jammed at rinse stage and all lights came on (except spin speeds) and humming noise and nothing...
E20 is an error code for drainage failure.



Check where the appliance drain hose connects to the house drains for a blockage.

If it's onto a spigot under the sink, take them off and check both for a blockage.

If these are ok then it's likely to be a blockage in the pump.



You'll need to drain the water out manually.

Put a shallow dish below the filter and slacken the filter.

Tighten it to stop the flow of water while you empty the dish.

Once empty, take the filter out, clean out the debris and ensure nothing is left jamming the pump.

Before refitting the filter, put the machine on drain or spin and listen at the filter housing to see if you can hear the pump running.

If you do, fit the filter and try the machine again.


Thanks for using FixYa
Read full answer
Oct 11, 2011 • Zanussi ZWD1470W Front Load Washer / Dryer
0helpful
1answer

I am in urgent need of an operation manual for the motorola w375.I have mislaid the original and I am wondering how I can replace it? Any help greatfully apreciated!!
http://www.motorola.com/staticfiles/Support/US-EN/Mobile%20Phones/W375-USA/US-EN/_Documents/Static%20Files/W375_UserGuide_Tracfone.pdf hope this helps
Read full answer
Mar 11, 2011 • Motorola Cell Phones
1helpful
1answer

What is e20 mean
E20 is an error code for drainage failure.



Check where the appliance drain hose connects to the house drains for a blockage.

If it's onto a spigot under the sink, take them off and check both for a blockage.

If these are ok then it's likely to be a blockage in the pump.



You'll need to drain the water out manually.

Put a shallow dish below the filter and slacken the filter.

Tighten it to stop the flow of water while you empty the dish.

Once empty, take the filter out, clean out the debris and ensure nothing is left jamming the pump.

Before refitting the filter, put the machine on drain or spin and listen at the filter housing to see if you can hear the pump running.

If you do, fit the filter and try the machine again.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Read full answer
Sep 26, 2010 • Frigidaire GLTF2940ES Front Load Washer
5helpful
1answer

Error cde E20 on zanussi zwf 1631
E20 is an error code for drainage failure.



Check where the appliance drain hose connects to the house drains for a blockage.

If it's onto a spigot under the sink, take them off and check both for a blockage.

If these are ok then it's likely to be a blockage in the pump.



You'll need to drain the water out manually.

Put a shallow dish below the filter and slacken the filter.

Tighten it to stop the flow of water while you empty the dish.

Once empty, take the filter out, clean out the debris and ensure nothing is left jamming the pump.

Before refitting the filter, put the machine on drain or spin and listen at the filter housing to see if you can hear the pump running.

If you do, fit the filter and try the machine again.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Read full answer
Sep 17, 2010 • Washing Machines
0helpful
1answer

Hotpoint wd860 code f20
E20 is an error code for drainage failure.



Check where the appliance drain hose connects to the house drains for a blockage.

If it's onto a spigot under the sink, take them off and check both for a blockage.

If these are ok then it's likely to be a blockage in the pump.



You'll need to drain the water out manually.

Put a shallow dish below the filter and slacken the filter.

Tighten it to stop the flow of water while you empty the dish.

Once empty, take the filter out, clean out the debris and ensure nothing is left jamming the pump.

Before refitting the filter, put the machine on drain or spin and listen at the filter housing to see if you can hear the pump running.

If you do, fit the filter and try the machine again.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Read full answer
Jul 23, 2009 • Washing Machines
1helpful
1answer

Error code E20
E20 is an error code for drainage failure.



Check where the appliance drain hose connects to the house drains for a blockage.

If it's onto a spigot under the sink, take them off and check both for a blockage.

If these are ok then it's likely to be a blockage in the pump.



You'll need to drain the water out manually.

Put a shallow dish below the filter and slacken the filter.

Tighten it to stop the flow of water while you empty the dish.

Once empty, take the filter out, clean out the debris and ensure nothing is left jamming the pump.

Before refitting the filter, put the machine on drain or spin and listen at the filter housing to see if you can hear the pump running.

If you do, fit the filter and try the machine again.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Read full answer
Jun 06, 2009 • Washing Machines
0helpful
1answer

Mywashing machine getting E2 display
E2 is an error code for drainage failure.



Check where the appliance drain hose connects to the house drains for a blockage.

If it's onto a spigot under the sink, take them off and check both for a blockage.

If these are ok then it's likely to be a blockage in the pump.



You'll need to drain the water out manually.

Put a shallow dish below the filter and slacken the filter.

Tighten it to stop the flow of water while you empty the dish.

Once empty, take the filter out, clean out the debris and ensure nothing is left jamming the pump.

Before refitting the filter, put the machine on drain or spin and listen at the filter housing to see if you can hear the pump running.

If you do, fit the filter and try the machine again.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Read full answer
Jan 28, 2009 • Washing Machines
0helpful
1answer

Zanussi ZWF1437W E23
E23 indicates Drain pump faulty; Wiring faulty; PCB faulty.

The service information also says it should stop with the door open.



Unplug the appliance and manually remove the water via the filter or front drain point if it's fitted.

Drain it into a shallow dish, tighten the filter when you need to stop the water (or plug the hose if draining via a hose) while you empty the container.



Once empty, try the door again.

Take the filter out and clean out any debris in it.

Plug the appliance in and put the machine on a drain programe.

Listen/look at the open filter to check that the drain pump is running.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Read full answer
Jan 27, 2009 • Washing Machines
0helpful
1answer

Hoover easy logic error message number 3 model is a EL 160
E3 indicates Drain pump faulty; Wiring faulty; PCB faulty.

The service information also says it should stop with the door open.



Unplug the appliance and manually remove the water via the filter or front drain point if it's fitted.

Drain it into a shallow dish, tighten the filter when you need to stop the water (or plug the hose if draining via a hose) while you empty the container.



Once empty, try the door again.

Take the filter out and clean out any debris in it.

Plug the appliance in and put the machine on a drain program.

Listen/look at the open filter to check that the drain pump is running.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Read full answer
Jan 25, 2009 • Washing Machines
Not finding what you are looking for?

View Most Popular

AAA140 Front Load Washer

  • Washing Machines

Related Question

Russel Hobbs Dual slow cooker 10951 I need the instructions to to start up urgently. I seem to have mislaid my manual.

  • Refrigerators

Open Questions:

0answers

Hi. The Fabric Softner continues to be left in the tray on most washes. I have tried cleaning in and around the tray after taking it out and still the softner remains. Can you help?
Read full answer
Be the first to answer Jun 04, 2014 • Hoover AAA140 Front Load Washer
0answers

flashing lock light on hoover dyn8144d display flashing lock light the machine wont work at all
Read full answer
Be the first to answer Nov 09, 2013 • Hoover AAA140 Front Load Washer
0answers

Stain blaster light keeps flashing
Read full answer
Be the first to answer Jan 17, 2013 • Hoover AAA140 Front Load Washer
0answers

hoover washing machine model vhd-822 won't spin won't spin
Read full answer
Be the first to answer Oct 19, 2012 • Hoover AAA140 Front Load Washer

See all Hoover AAA140 Front Load Washer Questions

Related Topics

196 views

Ask a Question

Usually answered in minutes!

Popular Questions

I just opened my washing machine door after finishing a wash and there was smoke coming out of the door and a smell of burning. It is a Hoover model no HWB814D-80S.

Hoover Washing Machines

Hoover WMH168D error code E08

Hoover Washing Machines

Error code E11 on hoover

Hoover Washing Machines

How do I reset a e20 error code on my hoover washing machine

Hoover Washing Machines

Hoover washer dryer error code h01

Hoover Washing Machines

Top Hoover Washing Machines Experts

W.L.

Level 3 Expert

2511 Answers

Steve F

Level 3 Expert

1361 Answers

Mike

Level 3 Expert

4383 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. AAA140 Front Load Washer Manual

AAA140 Front Load...

Loading...